Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Jeep Wrangler built from 1997 to 2006 (SE, X, Sport, Sahara, Rubicon, Unlimited, Unlimited Rubicon).
Every 1997-2006 Jeep Wrangler uses a 5X114.3 bolt pattern with a 71.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is 1/2"-20UNF. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Jeep Wrangler (TJ) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| SE | 1997-2006 | 15x7 +25 15x7 +30 15x7 +31.75 15x8 +25.4 |
| X | 2002-2006 | 15x7 +25 15x7 +30 15x7 +31.75 15x8 +25.4 |
| Sport | 1997-2006 | 15x7 +25 15x7 +30 15x7 +31.75 15x8 +25.4 |
| Sahara | 1997-2006 | 15x7 +25 15x7 +30 15x7 +31.75 15x8 +25.4 16x7 +25.4 16x7.5 +25 16x8 +12.7 |
| Rubicon | 2003-2006 | 16x7 +25.4 16x7.5 +25 16x8 +12.7 |
| Unlimited | 2004-2006 | See factory sizes below |
| Unlimited Rubicon | 2005-2006 | See factory sizes below |
Wheel sizes Jeep fitted to the 1997-2006 Jeep Wrangler from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 15x7 +25 |
| 15x7 +30 |
| 15x7 +31.75 |
| 15x8 +25.4 |
| 16x7 +25.4 |
| 16x7.5 +25 |
| 16x8 +12.7 |
| 17x8 +10 |
Widths and offsets with Verified Fitment on the 1997-2006 Jeep Wrangler: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 15-19" | 7" | +15 to +35 |
| 15-19" | 7.5" | +21 to +31 |
Wider still: 15x8.5 +13 to +24; 16x8.5 +13 to +24; 17x8.5 +13 to +24; 18x8.5 +13 to +24; 19x8.5 +13 to +24 fit with modifications (roll fender lips / trim plastic fender liners, 1-2 in leveling or lift kit for larger tires, hub-centric rings for aftermarket wheels).
| Diameter | Width | Offset range |
|---|---|---|
| 16-19" | 7" | +15 to +35 |
| 16-19" | 7.5" | +21 to +31 |
Wider still: 16x8.5 +13 to +24; 17x8.5 +13 to +24; 18x8.5 +13 to +24; 19x8.5 +13 to +24 fit with modifications (roll fender lips / trim plastic fender liners, 1-2 in leveling or lift kit for larger tires, hub-centric rings for aftermarket wheels).
| Diameter | Width | Offset range |
|---|---|---|
| 15-19" | 7" | +15 to +37 |
| 15-19" | 7.5" | +21 to +31 |
Wider still: 15x8.5 +13 to +24; 16x8.5 +13 to +24; 17x8.5 +13 to +24; 18x8.5 +13 to +24; 19x8.5 +13 to +24 fit with modifications (roll fender lips / trim plastic fender liners, 1-2 in leveling or lift kit for larger tires, hub-centric rings for aftermarket wheels).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 1997-2006 Jeep Wrangler. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (roll fender lips / trim plastic fender liners, 1-2 in leveling or lift kit for larger tires, hub-centric rings for aftermarket wheels)
Modifications Required (roll fender lips / trim plastic fender liners, 1-2 in leveling or lift kit for larger tires, hub-centric rings for aftermarket wheels)
Modifications Required (roll fender lips / trim plastic fender liners, 1-2 in leveling or lift kit for larger tires, hub-centric rings for aftermarket wheels)
The 1997-2006 Jeep Wrangler (TJ) uses a 5X114.3 bolt pattern and a 71.5 mm center bore.
Factory sizes: 15x7 +25; 15x7 +30; 15x7 +31.75; 15x8 +25.4; 16x7 +25.4; 16x7.5 +25; 16x8 +12.7; 17x8 +10.
Its wheel fasteners use a 1/2"-20UNF thread.
Bolt-on sizes run from 15" to 19" in diameter; see the size table for the offset range at each width.