Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mazda Mazda3 built from 2004 to 2009 (i, i Sport, i Touring, s, s Sport, s Touring, s Grand Touring, Mazdaspeed3).
Every 2004-2009 Mazda Mazda3 uses a 5X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mazda Mazda3 (BK) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| i | 2004-2009 | See factory sizes below |
| i Sport | 2006-2009 | See factory sizes below |
| i Touring | 2006-2009 | See factory sizes below |
| s | 2004-2009 | See factory sizes below |
| s Sport | 2006-2009 | See factory sizes below |
| s Touring | 2006-2009 | See factory sizes below |
| s Grand Touring | 2006-2009 | See factory sizes below |
| Mazdaspeed3 | 2007-2009 | 18x7 +48 |
Wheel sizes Mazda fitted to the 2004-2009 Mazda Mazda3 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 15x6 +52.5 |
| 16x6.5 +52.5 |
| 17x6.5 +52.5 |
| 18x7 +48 |
Widths and offsets with Verified Fitment on the 2004-2009 Mazda Mazda3: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 15-19" | 6.5" | +35 to +58 |
| 15-19" | 7" | +42 to +52 |
Wider still: 15x8 +34 to +45; 16x8 +34 to +45; 17x8 +34 to +45; 18x8 +34 to +45; 19x8 +34 to +45 fit with modifications (roll front and rear fender lips, front camber bolts / rear camber adjustment for -1° or more, hub-centric rings if the wheel bore is larger).
| Diameter | Width | Offset range |
|---|---|---|
| 18-19" | 7" | +42 to +52 |
Wider still: 18x8 +34 to +45; 19x8 +34 to +45 fit with modifications (roll front and rear fender lips, front camber bolts / rear camber adjustment for -1° or more, hub-centric rings if the wheel bore is larger).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2004-2009 Mazda Mazda3. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (roll front and rear fender lips, front camber bolts / rear camber adjustment for -1° or more, hub-centric rings if the wheel bore is larger)







Modifications Required (roll front and rear fender lips, front camber bolts / rear camber adjustment for -1° or more, hub-centric rings if the wheel bore is larger)






The 2004-2009 Mazda Mazda3 (BK) uses a 5X114.3 bolt pattern and a 67.1 mm center bore.
Factory sizes: 15x6 +52.5; 16x6.5 +52.5; 17x6.5 +52.5; 18x7 +48.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 15" to 19" in diameter; see the size table for the offset range at each width.