Mazda Mazda3 (BP) 2019-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Mazda Mazda3 built from 2019 to 2026 (Select, Preferred, Carbon Edition, Premium, Turbo).

Fitment specs

Bolt pattern5X114.3
Center bore67.1 mm
Lug threadM12x1.5
Model years2019-2026
GenerationBP

Every 2019-2026 Mazda Mazda3 uses a 5X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Mazda Mazda3 (BP) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYears
Select2019-2026
Preferred2019-2026
Carbon Edition2021-2026
Premium2019-2026
Turbo2021-2026

Factory wheel sizes

Wheel sizes Mazda fitted to the 2019-2026 Mazda Mazda3 from the factory. Offsets are ET in millimeters.

Factory size
16x6.5 +45
17x6.5 +45
17x7 +45
18x7 +45
18x7.5 +45
19x7.5 +45

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2019-2026 Mazda Mazda3: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
16-19"6.5"+22 to +55
16-19"7"+28 to +50
16-19"7.5"+34 to +44

Wider still: 16x8.5 +26 to +37; 17x8.5 +26 to +37; 18x8.5 +26 to +37; 19x8.5 +26 to +37 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2019-2026 Mazda Mazda3. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)

FAQ

What is the bolt pattern of the 2019-2026 Mazda Mazda3?

The 2019-2026 Mazda Mazda3 (BP) uses a 5X114.3 bolt pattern and a 67.1 mm center bore.

What size wheels came on the 2019-2026 Mazda Mazda3 from the factory?

Factory sizes: 16x6.5 +45; 17x6.5 +45; 17x7 +45; 18x7 +45; 18x7.5 +45; 19x7.5 +45.

What lug thread size does the 2019-2026 Mazda Mazda3 use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2019-2026 Mazda Mazda3 without modifications?

Bolt-on sizes run from 16" to 19" in diameter; see the size table for the offset range at each width.