Mercedes-Benz CL-Class (C215) 2000-2006 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz CL-Class built from 2000 to 2006 (CL500, CL600, CL55 AMG, CL65 AMG).

Fitment specs

Bolt pattern5X112
Center bore66.6 mm
Lug threadM14x1.5
Model years2000-2006
GenerationC215

Every 2000-2006 Mercedes-Benz CL-Class uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Mercedes-Benz CL-Class (C215) and the model years each was sold. All of them share the 5X112 bolt pattern.

SubmodelYearsFactory wheel sizes
CL5002000-200617x7.5 +46
18x8 +44
18x8 +44 front / 18x9 +46 rear
CL6002001-200618x8 +44
18x8 +44 front / 18x9 +46 rear
19x8.5 +44 front / 19x9.5 +46 rear
CL55 AMG2001-2006See factory sizes below
CL65 AMG2005-2006See factory sizes below

Factory wheel sizes

Wheel sizes Mercedes-Benz fitted to the 2000-2006 Mercedes-Benz CL-Class from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
17x7.5 +46
18x8 +44
18x8 +44 front / 18x9 +46 rear
18x9 +46
19x8.5 +44 front / 19x9.5 +46 rear
19x9.5 +46
20x9 +40 front / 20x10 +50 rear
20x10 +50

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2000-2006 Mercedes-Benz CL-Class: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

CL500

DiameterWidthFront offsetRear offset
18-19"7.5"+10 to +56—
18-19"8"+16 to +62+16 to +62
18-19"8.5"+23 to +58+23 to +58
18-19"9"+29 to +51+29 to +51
18-19"9.5"+35 to +45+35 to +45

Wider still: 18x10.5 front +27 to +38 / rear +27 to +38; 19x10.5 front +27 to +38 / rear +27 to +38 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).

CL600

DiameterWidthOffset range
18-19"8"+16 to +54
18-19"8.5"+23 to +58
18-19"9"+29 to +51
18-19"9.5"+35 to +45

Wider still: 18x10.5 +27 to +38; 19x10.5 +27 to +38 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).

CL55 AMG, CL65 AMG

DiameterWidthFront offsetRear offset
18-19"8"+16 to +54—
18-19"8.5"+23 to +58—
18-19"9"+29 to +51+29 to +51
18-19"9.5"+35 to +45+35 to +45

Wider still: 18x10.5 front +27 to +38 / rear +27 to +38; 19x10.5 front +27 to +38 / rear +27 to +38 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2000-2006 Mercedes-Benz CL-Class. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

CL500

Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)

CL600

Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)

CL55 AMG, CL65 AMG

Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)

FAQ

What is the bolt pattern of the 2000-2006 Mercedes-Benz CL-Class?

The 2000-2006 Mercedes-Benz CL-Class (C215) uses a 5X112 bolt pattern and a 66.6 mm center bore.

What size wheels came on the 2000-2006 Mercedes-Benz CL-Class from the factory?

Factory sizes: 17x7.5 +46; 18x8 +44; 18x8 +44 front / 18x9 +46 rear; 18x9 +46; 19x8.5 +44 front / 19x9.5 +46 rear; 19x9.5 +46; 20x9 +40 front / 20x10 +50 rear; 20x10 +50.

What lug thread size does the 2000-2006 Mercedes-Benz CL-Class use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2000-2006 Mercedes-Benz CL-Class without modifications?

Bolt-on sizes run from 18" to 19" in diameter; see the size table for the offset range at each width.