Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz CL-Class built from 2007 to 2014 (CL550, CL550 4MATIC, CL600, CL63 AMG, CL65 AMG).
Every 2007-2014 Mercedes-Benz CL-Class uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz CL-Class (C216) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| CL550 | 2007-2010 | 17x8 +43 18x8.5 +43 18x8.5 +43 front / 18x9.5 +43 rear 19x8.5 +43 19x8.5 +43 front / 19x9.5 +43 rear 20x8.5 +43 20x8.5 +43 front / 20x9.5 +43 rear |
| CL550 4MATIC | 2011-2014 | See factory sizes below |
| CL600 | 2007-2014 | See factory sizes below |
| CL63 AMG | 2008-2014 | See factory sizes below |
| CL65 AMG | 2008-2014 | See factory sizes below |
Wheel sizes Mercedes-Benz fitted to the 2007-2014 Mercedes-Benz CL-Class from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x8 +43 |
| 18x8.5 +43 |
| 18x8.5 +43 front / 18x9.5 +43 rear |
| 19x8.5 +43 |
| 19x8.5 +43 front / 19x9.5 +43 rear |
| 20x8.5 +43 |
| 20x8.5 +43 front / 20x9.5 +43 rear |
Widths and offsets with Verified Fitment on the 2007-2014 Mercedes-Benz CL-Class: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 17-21" | 8" | +19 to +53 | — |
| 17-21" | 8.5" | +26 to +48 | +13 to +59 |
| 17-21" | 9" | +32 to +42 | +19 to +55 |
| 17-21" | 9.5" | — | +26 to +48 |
| 17-21" | 10" | — | +32 to +42 |
Wider still: 17x11 front — / rear +24 to +35; 18x11 front — / rear +24 to +35; 19x11 front — / rear +24 to +35; 20x11 front — / rear +24 to +35; 21x11 front — / rear +24 to +35 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 17-21" | 8.5" | +26 to +48 | — |
| 17-21" | 9" | +32 to +42 | — |
| 17-21" | 9.5" | — | +26 to +48 |
| 17-21" | 10" | — | +32 to +42 |
Wider still: 17x11 front — / rear +24 to +35; 18x11 front — / rear +24 to +35; 19x11 front — / rear +24 to +35; 20x11 front — / rear +24 to +35; 21x11 front — / rear +24 to +35 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2007-2014 Mercedes-Benz CL-Class. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.












Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)


















Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)







The 2007-2014 Mercedes-Benz CL-Class (C216) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 17x8 +43; 18x8.5 +43; 18x8.5 +43 front / 18x9.5 +43 rear; 19x8.5 +43; 19x8.5 +43 front / 19x9.5 +43 rear; 20x8.5 +43; 20x8.5 +43 front / 20x9.5 +43 rear.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 17" to 21" in diameter; see the size table for the offset range at each width.