Mercedes-Benz M-Class (W164) 2006-2011 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz M-Class built from 2006 to 2011 (ML350, ML500, ML550, ML320 CDI, ML350 BlueTEC, ML450 Hybrid, ML63 AMG).

Fitment specs

Bolt pattern5X112
Center bore66.6 mm
Lug threadM14x1.5
Model years2006-2011
GenerationW164

Every 2006-2011 Mercedes-Benz M-Class uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Mercedes-Benz M-Class (W164) and the model years each was sold. All of them share the 5X112 bolt pattern.

SubmodelYearsFactory wheel sizes
ML3502006-201117x7.5 +56
18x8 +60
19x8 +60
19x8.5 +58
19x9.5 +56
20x8.5 +55
20x8.5 +60
21x9 +60
ML5002006-200718x8 +60
19x8 +60
19x8.5 +58
19x8.5 +60
19x9.5 +56
20x8.5 +55
20x8.5 +60
21x9 +60
ML5502008-201119x8 +60
19x8.5 +58
19x8.5 +60
19x8.5 +58 front / 19x9.5 +56 rear
19x9.5 +56
20x8.5 +55
20x8.5 +60
21x9 +60
ML320 CDI2007-200917x7.5 +56
18x8 +60
19x8 +60
19x8.5 +60
19x8.5 +58 front / 19x9.5 +56 rear
19x8.5 +60 front / 19x9.5 +56 rear
20x8.5 +55
20x8.5 +60
21x9 +60
ML350 BlueTEC2010-201117x7.5 +56
18x8 +60
19x8 +60
19x8.5 +58
19x8.5 +58 front / 19x9.5 +56 rear
19x8.5 +60 front / 19x9.5 +56 rear
20x8.5 +55
20x8.5 +60
21x9 +60
ML450 Hybrid2010-2011See factory sizes below
ML63 AMG2007-2011See factory sizes below

Factory wheel sizes

Wheel sizes Mercedes-Benz fitted to the 2006-2011 Mercedes-Benz M-Class from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
17x7.5 +56
18x8 +60
19x8 +60
19x8.5 +58
19x8.5 +60
19x8.5 +58 front / 19x9.5 +56 rear
19x8.5 +60 front / 19x9.5 +56 rear
19x9.5 +56
20x8.5 +55
20x8.5 +60
21x9 +60

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2006-2011 Mercedes-Benz M-Class: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

ML350, ML320 CDI, ML350 BlueTEC, ML450 Hybrid, ML63 AMG

DiameterWidthFront offsetRear offset
17-21"7.5"+28 to +66+37 to +66
17-21"8"+34 to +72+43 to +65
17-21"8.5"+41 to +65+49 to +59
17-21"9"+47 to +59—

Wider still: 17x10 front +39 to +52 / rear —; 17x10.5 front +46 / rear —; 18x10 front +39 to +52 / rear —; 18x10.5 front +46 / rear —; 19x10 front +39 to +52 / rear —; 19x10.5 front +46 / rear —… fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).

ML500

DiameterWidthFront offsetRear offset
18-21"8"+34 to +70+43 to +65
18-21"8.5"+41 to +65+49 to +59
18-21"9"+47 to +59—

Wider still: 18x10 front +39 to +52 / rear —; 18x10.5 front +46 / rear —; 19x10 front +39 to +52 / rear —; 19x10.5 front +46 / rear —; 20x10 front +39 to +52 / rear —; 20x10.5 front +46 / rear —… fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).

ML550

DiameterWidthFront offsetRear offset
19-21"8"+34 to +70+43 to +65
19-21"8.5"+41 to +65+49 to +59
19-21"9"+47 to +59—

Wider still: 19x10 front +39 to +52 / rear —; 19x10.5 front +46 / rear —; 20x10 front +39 to +52 / rear —; 20x10.5 front +46 / rear —; 21x10 front +39 to +52 / rear —; 21x10.5 front +46 / rear — fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2006-2011 Mercedes-Benz M-Class. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

ML350, ML320 CDI, ML350 BlueTEC, ML450 Hybrid, ML63 AMG

Modifications Required (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers)

ML500

Modifications Required (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers)

ML550

Modifications Required (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers)

FAQ

What is the bolt pattern of the 2006-2011 Mercedes-Benz M-Class?

The 2006-2011 Mercedes-Benz M-Class (W164) uses a 5X112 bolt pattern and a 66.6 mm center bore.

What size wheels came on the 2006-2011 Mercedes-Benz M-Class from the factory?

Factory sizes: 17x7.5 +56; 18x8 +60; 19x8 +60; 19x8.5 +58; 19x8.5 +60; 19x8.5 +58 front / 19x9.5 +56 rear; 19x8.5 +60 front / 19x9.5 +56 rear; 19x9.5 +56; 20x8.5 +55; 20x8.5 +60; 21x9 +60.

What lug thread size does the 2006-2011 Mercedes-Benz M-Class use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2006-2011 Mercedes-Benz M-Class without modifications?

Bolt-on sizes run from 17" to 21" in diameter; see the size table for the offset range at each width.