Mercedes-Benz M-Class (W166) 2012-2015 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz M-Class built from 2012 to 2015 (ML350, ML350 4MATIC, ML350 BlueTEC, ML250 BlueTEC, ML400, ML550, ML63 AMG).

Fitment specs

Bolt pattern5X112
Center bore66.6 mm
Lug threadM14x1.5
Model years2012-2015
GenerationW166

Every 2012-2015 Mercedes-Benz M-Class uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Mercedes-Benz M-Class (W166) and the model years each was sold. All of them share the 5X112 bolt pattern.

SubmodelYearsFactory wheel sizes
ML3502012-201519x8 +56
19x8.5 +56
19x8.5 +59
19x8.5 +62
20x9 +57
21x9 +53
ML350 4MATIC2012-2015See factory sizes below
ML350 BlueTEC2012-201419x8 +56
19x8.5 +56
19x8.5 +59
19x8.5 +62
20x9 +57
21x9 +53
ML250 BlueTEC201518x8 +56
19x8 +56
19x8.5 +56
19x8.5 +59
19x8.5 +62
20x9 +57
ML400201519x8.5 +56
19x8.5 +59
19x8.5 +62
21x9 +53
21x10 +56
ML5502012-201419x8.5 +56
19x8.5 +59
19x8.5 +62
20x9 +57
21x9 +53
21x10 +56
ML63 AMG2012-2015See factory sizes below

Factory wheel sizes

Wheel sizes Mercedes-Benz fitted to the 2012-2015 Mercedes-Benz M-Class from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x8 +56
19x8 +56
19x8.5 +56
19x8.5 +59
19x8.5 +62
20x9 +57
21x9 +53
21x10 +56

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2012-2015 Mercedes-Benz M-Class: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

ML350, ML350 BlueTEC

DiameterWidthOffset range
19-23"8"+32 to +66
19-23"8.5"+39 to +61
19-23"9"+45 to +55

Wider still: 19x10 +37 to +48; 20x10 +37 to +48; 21x10 +37 to +48; 22x10 +37 to +48; 23x10 +37 to +48 fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).

ML350 4MATIC, ML63 AMG

DiameterWidthOffset range
18-23"8.5"+39 to +61
18-23"9"+45 to +55

Wider still: 18x10 +37 to +48; 19x10 +37 to +48; 20x10 +37 to +48; 21x10 +37 to +48; 22x10 +37 to +48; 23x10 +37 to +48 fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).

ML250 BlueTEC

DiameterWidthOffset range
18-23"8"+32 to +66
18-23"8.5"+39 to +61
18-23"9"+45 to +55

Wider still: 18x10 +37 to +48; 19x10 +37 to +48; 20x10 +37 to +48; 21x10 +37 to +48; 22x10 +37 to +48; 23x10 +37 to +48 fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).

ML400, ML550

DiameterWidthOffset range
19-23"8.5"+39 to +61
19-23"9"+45 to +55

Wider still: 19x10 +37 to +48; 20x10 +37 to +48; 21x10 +37 to +48; 22x10 +37 to +48; 23x10 +37 to +48 fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2012-2015 Mercedes-Benz M-Class. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

ML350, ML350 BlueTEC

Modifications Required (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers)

ML350 4MATIC, ML63 AMG

Modifications Required (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers)

ML250 BlueTEC

Modifications Required (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers)

ML400, ML550

Modifications Required (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers)

FAQ

What is the bolt pattern of the 2012-2015 Mercedes-Benz M-Class?

The 2012-2015 Mercedes-Benz M-Class (W166) uses a 5X112 bolt pattern and a 66.6 mm center bore.

What size wheels came on the 2012-2015 Mercedes-Benz M-Class from the factory?

Factory sizes: 18x8 +56; 19x8 +56; 19x8.5 +56; 19x8.5 +59; 19x8.5 +62; 20x9 +57; 21x9 +53; 21x10 +56.

What lug thread size does the 2012-2015 Mercedes-Benz M-Class use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2012-2015 Mercedes-Benz M-Class without modifications?

Bolt-on sizes run from 18" to 23" in diameter; see the size table for the offset range at each width.