Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Nissan Frontier built from 1998 to 2004 (XE, SE, Desert Runner, SC, NISMO).
Every 1998-2004 Nissan Frontier uses a 6X139.7 bolt pattern with a 100.3 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 100.3 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Nissan Frontier (D22) and the model years each was sold. All of them share the 6X139.7 bolt pattern.
| Submodel | Years |
|---|---|
| XE | 1998-2004 |
| SE | 1998-2004 |
| Desert Runner | 2000-2004 |
| SC | 2001-2004 |
| NISMO | 2004 |
Wheel sizes Nissan fitted to the 1998-2004 Nissan Frontier from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 15x6 +18 |
| 15x7 +20 |
| 16x7 +40 |
| 17x8 +40 |
Widths and offsets with Verified Fitment on the 1998-2004 Nissan Frontier: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 15-17" | 6" | -10 to +28 |
| 15-17" | 6.5" | -3 to +32 |
| 15-17" | 7" | +3 to +25 |
| 15-17" | 7.5" | +9 to +19 |
Wider still: 15x8.5 +1 to +12; 16x8.5 +1 to +12; 17x8.5 +1 to +12 fit with modifications (2-in leveling kit for 32-33 in tires, trim front bumper / air dam and inner fender liners, aftermarket upper control arms if leveled more than 2 in).
The 1998-2004 Nissan Frontier (D22) uses a 6X139.7 bolt pattern and a 100.3 mm center bore.
Factory sizes: 15x6 +18; 15x7 +20; 16x7 +40; 17x8 +40.
Its wheel fasteners use a M12x1.25 thread.
Bolt-on sizes run from 15" to 17" in diameter; see the size table for the offset range at each width.