Nissan Frontier (D40) 2005-2021 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Nissan Frontier built from 2005 to 2021 (XE, S, SE, SV, LE, Desert Runner, NISMO, PRO-4X).

Fitment specs

Bolt pattern6X114.3
Center bore66.1 mm
Lug threadM12x1.25
Model years2005-2021
GenerationD40

Every 2005-2021 Nissan Frontier uses a 6X114.3 bolt pattern with a 66.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Nissan Frontier (D40) and the model years each was sold. All of them share the 6X114.3 bolt pattern.

SubmodelYears
XE2005-2010
S2011-2021
SE2005-2010
SV2011-2021
LE2005-2010
Desert Runner2016-2019
NISMO2005-2008
PRO-4X2009-2021

Factory wheel sizes

Wheel sizes Nissan fitted to the 2005-2021 Nissan Frontier from the factory. Offsets are ET in millimeters.

Factory size
15x6.5 +18
15x6.5 +20
15x7 +20
16x7 +30
17x7.5 +30
18x7.5 +30

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2005-2021 Nissan Frontier: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
15-18"6.5"+1 to +28
15-18"7"+7 to +34
15-18"7.5"+14 to +29
15-18"8"+20 to +23

Wider still: 15x8.5 +6 to +22; 15x9 +12 to +16; 16x8.5 +6 to +22; 16x9 +12 to +16; 17x8.5 +6 to +22; 17x9 +12 to +16… fit with modifications (2-in leveling kit for 32-33 in tires, trim front bumper / air dam and inner fender liners, aftermarket upper control arms if leveled more than 2 in).

FAQ

What is the bolt pattern of the 2005-2021 Nissan Frontier?

The 2005-2021 Nissan Frontier (D40) uses a 6X114.3 bolt pattern and a 66.1 mm center bore.

What size wheels came on the 2005-2021 Nissan Frontier from the factory?

Factory sizes: 15x6.5 +18; 15x6.5 +20; 15x7 +20; 16x7 +30; 17x7.5 +30; 18x7.5 +30.

What lug thread size does the 2005-2021 Nissan Frontier use?

Its wheel fasteners use a M12x1.25 thread.

What aftermarket wheel sizes fit the 2005-2021 Nissan Frontier without modifications?

Bolt-on sizes run from 15" to 18" in diameter; see the size table for the offset range at each width.