Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Nissan Frontier built from 2022 to 2026 (S, SV, SL, PRO-X, PRO-4X).
Every 2022-2026 Nissan Frontier uses a 6X114.3 bolt pattern with a 66.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Nissan Frontier (D41) and the model years each was sold. All of them share the 6X114.3 bolt pattern.
| Submodel | Years |
|---|---|
| S | 2022-2026 |
| SV | 2022-2026 |
| SL | 2024-2026 |
| PRO-X | 2022-2026 |
| PRO-4X | 2022-2026 |
Wheel sizes Nissan fitted to the 2022-2026 Nissan Frontier from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 16x6 +55 |
| 16x7 +45 |
| 17x7 +45 |
| 18x7 +45 |
| 18x9 +45 |
Widths and offsets with Verified Fitment on the 2022-2026 Nissan Frontier: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-20" | 6" | +15 to +63 |
| 16-20" | 6.5" | +22 to +57 |
| 16-20" | 7" | +28 to +50 |
| 16-20" | 7.5" | +34 to +44 |
Wider still: 16x8.5 +26 to +37; 17x8.5 +26 to +37; 18x8.5 +26 to +37; 19x8.5 +26 to +37; 20x8.5 +26 to +37 fit with modifications (2-in leveling kit for 32-33 in tires, trim front bumper / air dam and inner fender liners, aftermarket upper control arms if leveled more than 2 in).
The 2022-2026 Nissan Frontier (D41) uses a 6X114.3 bolt pattern and a 66.1 mm center bore.
Factory sizes: 16x6 +55; 16x7 +45; 17x7 +45; 18x7 +45; 18x9 +45.
Its wheel fasteners use a M12x1.25 thread.
Bolt-on sizes run from 16" to 20" in diameter; see the size table for the offset range at each width.