Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Nissan Versa built from 2013 to 2019 (S, S Plus, SV, SL, SR).
Every 2013-2019 Nissan Versa uses a 4X100 bolt pattern with a 60.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 60.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Nissan Versa (N17) and the model years each was sold. All of them share the 4X100 bolt pattern.
| Submodel | Years |
|---|---|
| S | 2013-2019 |
| S Plus | 2014-2017 |
| SV | 2013-2019 |
| SL | 2013-2019 |
| SR | 2016-2019 |
Wheel sizes Nissan fitted to the 2013-2019 Nissan Versa from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 14x5.5 +40 |
| 15x5.5 +40 |
| 15x6 +56 |
| 16x6 +45 |
Widths and offsets with Verified Fitment on the 2013-2019 Nissan Versa: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 14-18" | 5.5" | +9 to +50 |
| 14-18" | 6" | +15 to +56 |
| 14-18" | 6.5" | +21 to +51 |
| 14-18" | 7" | +28 to +44 |
| 14-18" | 7.5" | +34 to +38 |
The 2013-2019 Nissan Versa (N17) uses a 4X100 bolt pattern and a 60.1 mm center bore.
Factory sizes: 14x5.5 +40; 15x5.5 +40; 15x6 +56; 16x6 +45.
Its wheel fasteners use a M12x1.25 thread.
Bolt-on sizes run from 14" to 18" in diameter; see the size table for the offset range at each width.