Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Nissan Versa built from 2024 to 2025 (S, SV, SR).
Every 2024-2025 Nissan Versa uses a 4X100 bolt pattern with a 60.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 60.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Nissan Versa (N18) and the model years each was sold. All of them share the 4X100 bolt pattern.
| Submodel | Years |
|---|---|
| S | 2024-2025 |
| SV | 2024-2025 |
| SR | 2024-2025 |
Wheel sizes Nissan fitted to the 2024-2025 Nissan Versa from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 15x6.5 +52 |
| 16x6 +50 |
| 17x6.5 +55 |
Widths and offsets with Verified Fitment on the 2024-2025 Nissan Versa: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 15-18" | 6.5" | +35 to +60 |
| 15-18" | 7" | +41 to +54 |
| 15-18" | 7.5" | +48 |
Wider still: 15x8 +33 to +47; 15x8.5 +40 to +41; 16x8 +33 to +47; 16x8.5 +40 to +41; 17x8 +33 to +47; 17x8.5 +40 to +41… fit with modifications (roll front and rear fender lips, front camber bolts (strut) for -1° or more, hub-centric rings if the wheel bore is larger).
The 2024-2025 Nissan Versa (N18) uses a 4X100 bolt pattern and a 60.1 mm center bore.
Factory sizes: 15x6.5 +52; 16x6 +50; 17x6.5 +55.
Its wheel fasteners use a M12x1.25 thread.
Bolt-on sizes run from 15" to 18" in diameter; see the size table for the offset range at each width.