Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Nissan Versa built from 2020 to 2023 (S, SV, SR).
Every 2020-2023 Nissan Versa uses a 4X100 bolt pattern with a 60.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 60.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Nissan Versa (N18) and the model years each was sold. All of them share the 4X100 bolt pattern.
| Submodel | Years |
|---|---|
| S | 2020-2023 |
| SV | 2020-2023 |
| SR | 2020-2023 |
Wheel sizes Nissan fitted to the 2020-2023 Nissan Versa from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 14x5.5 +40 |
| 15x5.5 +40 |
| 16x6 +45 |
Widths and offsets with Verified Fitment on the 2020-2023 Nissan Versa: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 14-18" | 5.5" | +23 to +45 |
| 14-18" | 6" | +29 to +39 |
Wider still: 14x7 +21 to +32; 15x7 +21 to +32; 16x7 +21 to +32; 17x7 +21 to +32; 18x7 +21 to +32 fit with modifications (roll front and rear fender lips, front camber bolts (strut) for -1° or more, hub-centric rings if the wheel bore is larger).
The 2020-2023 Nissan Versa (N18) uses a 4X100 bolt pattern and a 60.1 mm center bore.
Factory sizes: 14x5.5 +40; 15x5.5 +40; 16x6 +45.
Its wheel fasteners use a M12x1.25 thread.
Bolt-on sizes run from 14" to 18" in diameter; see the size table for the offset range at each width.