Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Subaru Legacy built from 1990 to 1993 (L, LS, LSi).
Every 1990-1993 Subaru Legacy uses a 5X100 bolt pattern with a 56.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 56.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Subaru Legacy (BC/BF) and the model years each was sold. All of them share the 5X100 bolt pattern.
| Submodel | Years |
|---|---|
| L | 1990-1993 |
| LS | 1990-1993 |
| LSi | 1990-1993 |
Wheel sizes Subaru fitted to the 1990-1993 Subaru Legacy from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 14x5.5 +55 |
| 15x6 +55 |
| 15x6.5 +55 |
Widths and offsets with Verified Fitment on the 1990-1993 Subaru Legacy: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 14-15" | 5.5" | +38 to +60 |
| 14-15" | 6" | +44 to +54 |
Wider still: 14x7 +36 to +47; 15x7 +36 to +47 fit with modifications (roll rear fender lips, front camber bolts (strut-to-knuckle) for -1° or more, rear camber/toe arms if running low offset).
The 1990-1993 Subaru Legacy (BC/BF) uses a 5X100 bolt pattern and a 56.1 mm center bore.
Factory sizes: 14x5.5 +55; 15x6 +55; 15x6.5 +55.
Its wheel fasteners use a M12x1.25 thread.
Bolt-on sizes run from 14" to 15" in diameter; see the size table for the offset range at each width.