Subaru Legacy (BD/BG) 1999 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Subaru Legacy built from 1999 to 1999 (L, GT).

Fitment specs

Bolt pattern5X100
Center bore56.1 mm
Lug threadM12x1.25
Model years1999
GenerationBD/BG

Every 1999 Subaru Legacy uses a 5X100 bolt pattern with a 56.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 56.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Subaru Legacy (BD/BG) and the model years each was sold. All of them share the 5X100 bolt pattern.

SubmodelYears
L1999
GT1999

Factory wheel sizes

Wheel sizes Subaru fitted to the 1999 Subaru Legacy from the factory. Offsets are ET in millimeters.

Factory size
15x6 +55
15x6.5 +55
16x6.5 +55
16x7 +55
17x7 +55
17x7.5 +50
18x8 +48

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1999 Subaru Legacy: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
14-20"6"+25 to +65
14-20"6.5"+32 to +67
14-20"7"+38 to +60
14-20"7.5"+44 to +54

Wider still: 14x8.5 +36 to +47; 15x8.5 +36 to +47; 16x8.5 +36 to +47; 17x8.5 +36 to +47; 18x8.5 +36 to +47; 19x8.5 +36 to +47… fit with modifications (roll rear fender lips, front camber bolts (strut-to-knuckle) for -1° or more, rear camber/toe arms if running low offset).

FAQ

What is the bolt pattern of the 1999 Subaru Legacy?

The 1999 Subaru Legacy (BD/BG) uses a 5X100 bolt pattern and a 56.1 mm center bore.

What size wheels came on the 1999 Subaru Legacy from the factory?

Factory sizes: 15x6 +55; 15x6.5 +55; 16x6.5 +55; 16x7 +55; 17x7 +55; 17x7.5 +50; 18x8 +48.

What lug thread size does the 1999 Subaru Legacy use?

Its wheel fasteners use a M12x1.25 thread.

What aftermarket wheel sizes fit the 1999 Subaru Legacy without modifications?

Bolt-on sizes run from 14" to 20" in diameter; see the size table for the offset range at each width.