Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Subaru Legacy built from 2020 to 2025 (Base, Premium, Sport, Limited, Limited XT, Touring XT).
Every 2020-2025 Subaru Legacy uses a 5X114.3 bolt pattern with a 56.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 56.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Subaru Legacy (BW) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Base | 2020-2025 | 17x7 +55 17x7.5 +55 |
| Premium | 2020-2025 | 17x7 +55 17x7.5 +55 |
| Sport | 2020-2025 | 18x7.5 +55 |
| Limited | 2020-2025 | 18x7.5 +55 |
| Limited XT | 2020-2025 | 18x7.5 +55 |
| Touring XT | 2020-2025 | 18x7.5 +55 |
Wheel sizes Subaru fitted to the 2020-2025 Subaru Legacy from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7 +55 |
| 17x7.5 +55 |
| 18x7.5 +55 |
| 18x8 +48 |
| 18x8 +51 |
| 19x7.5 +55 |
| 19x8 +48 |
| 19x8 +51 |
| 19x8.5 +48 |
Widths and offsets with Verified Fitment on the 2020-2025 Subaru Legacy: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 17-20" | 7.5" | +28 to +60 |
| 17-20" | 8" | +34 to +54 |
| 17-20" | 8.5" | +40 to +48 |
Wider still: 17x9 +36 to +47; 18x9 +36 to +47; 19x9 +36 to +47; 20x9 +36 to +47 fit with modifications (roll rear fender lips, front camber bolts (strut-to-knuckle) for -1° or more, rear camber/toe arms if running low offset).
| Diameter | Width | Offset range |
|---|---|---|
| 18-20" | 7.5" | +28 to +60 |
| 18-20" | 8" | +34 to +54 |
| 18-20" | 8.5" | +40 to +48 |
Wider still: 18x9 +36 to +47; 19x9 +36 to +47; 20x9 +36 to +47 fit with modifications (roll rear fender lips, front camber bolts (strut-to-knuckle) for -1° or more, rear camber/toe arms if running low offset).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2020-2025 Subaru Legacy. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.










Modifications Required (roll rear fender lips, front camber bolts (strut-to-knuckle) for -1° or more, rear camber/toe arms if running low offset)





















Modifications Required (roll rear fender lips, front camber bolts (strut-to-knuckle) for -1° or more, rear camber/toe arms if running low offset)












The 2020-2025 Subaru Legacy (BW) uses a 5X114.3 bolt pattern and a 56.1 mm center bore.
Factory sizes: 17x7 +55; 17x7.5 +55; 18x7.5 +55; 18x8 +48; 18x8 +51; 19x7.5 +55; 19x8 +48; 19x8 +51; 19x8.5 +48.
Its wheel fasteners use a M12x1.25 thread.
Bolt-on sizes run from 17" to 20" in diameter; see the size table for the offset range at each width.