Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Subaru WRX STI built from 2004 to 2004.
Every 2004 Subaru WRX STI uses a 5X100 bolt pattern with a 56.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 56.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Subaru WRX STI (GD) and the model years each was sold. All of them share the 5X100 bolt pattern.
| Submodel | Years |
|---|---|
| Base | 2004 |
Wheel sizes Subaru fitted to the 2004 Subaru WRX STI from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7.5 +53 |
| 17x8 +48 |
| 18x8 +48 |
Widths and offsets with Verified Fitment on the 2004 Subaru WRX STI: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 17-18" | 7.5" | +36 to +58 |
| 17-18" | 8" | +42 to +52 |
Wider still: 17x9 +34 to +45; 18x9 +34 to +45 fit with modifications (roll and lightly pull rear fender lips, front camber bolts / rear camber arms for -1.5° or more, check strut and caliper clearance on low-offset wheels).
The 2004 Subaru WRX STI (GD) uses a 5X100 bolt pattern and a 56.1 mm center bore.
Factory sizes: 17x7.5 +53; 17x8 +48; 18x8 +48.
Bolt-on sizes run from 17" to 18" in diameter; see the size table for the offset range at each width.