Toyota Corolla (E140) 2009-2013 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Toyota Corolla built from 2009 to 2013 (Base, LE, S, XLE, XRS).

Fitment specs

Bolt pattern5X100
Center bore54.1 mm
Lug threadM12x1.5
Model years2009-2013
GenerationE140

Every 2009-2013 Toyota Corolla uses a 5X100 bolt pattern with a 54.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 54.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Toyota Corolla (E140) and the model years each was sold. All of them share the 5X100 bolt pattern.

SubmodelYearsFactory wheel sizes
Base2009-2013See factory sizes below
LE2009-201315x6 +33
16x6.5 +39
S2009-201316x6.5 +39
XLE2009-201016x6.5 +39
16x7 +40
XRS2009-201017x7 +39

Factory wheel sizes

Wheel sizes Toyota fitted to the 2009-2013 Toyota Corolla from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
15x6 +33
16x6.5 +39
17x7 +39
18x7.5 +32
18x7.5 +42

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2009-2013 Toyota Corolla: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Base, LE

DiameterWidthOffset range
15-18"6"+9 to +43
15-18"6.5"+16 to +49
15-18"7"+22 to +44
15-18"7.5"+28 to +38

Wider still: 15x8.5 +20 to +31; 16x8.5 +20 to +31; 17x8.5 +20 to +31; 18x8.5 +20 to +31 fit with modifications (roll front and rear fender lips, front camber bolts for extra negative camber, hub-centric rings for aftermarket wheels).

S, XLE

DiameterWidthOffset range
16-18"6.5"+16 to +49
16-18"7"+22 to +44
16-18"7.5"+28 to +38

Wider still: 16x8.5 +20 to +31; 17x8.5 +20 to +31; 18x8.5 +20 to +31 fit with modifications (roll front and rear fender lips, front camber bolts for extra negative camber, hub-centric rings for aftermarket wheels).

XRS

DiameterWidthOffset range
17-18"7"+22 to +44
17-18"7.5"+28 to +38

Wider still: 17x8.5 +20 to +31; 18x8.5 +20 to +31 fit with modifications (roll front and rear fender lips, front camber bolts for extra negative camber, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 2009-2013 Toyota Corolla?

The 2009-2013 Toyota Corolla (E140) uses a 5X100 bolt pattern and a 54.1 mm center bore.

What size wheels came on the 2009-2013 Toyota Corolla from the factory?

Factory sizes: 15x6 +33; 16x6.5 +39; 17x7 +39; 18x7.5 +32; 18x7.5 +42.

What lug thread size does the 2009-2013 Toyota Corolla use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2009-2013 Toyota Corolla without modifications?

Bolt-on sizes run from 15" to 18" in diameter; see the size table for the offset range at each width.