Toyota Corolla (E210) 2020-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Toyota Corolla built from 2020 to 2026 (Hybrid LE, L, LE, SE, SE Hatchback, XLE, XSE, XSE Hatchback, SE Apex Edition, SE Nightshade Edition, SE Nightshade Edition Hatchback, XSE Apex Edition, SE CVT, Hybrid SE, Hybrid SE Infrared, Hybrid XLE, Hybrid Nightshade, Nightshade, FX, Nightshade Hatchback).

Fitment specs

Bolt pattern5X100
Center bore54.1 mm
Lug threadM12x1.5
Model years2020-2026
GenerationE210

Every 2020-2026 Toyota Corolla uses a 5X100 bolt pattern with a 54.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 54.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Toyota Corolla (E210) and the model years each was sold. All of them share the 5X100 bolt pattern.

SubmodelYears
Hybrid LE2020-2026
L2020-2022
LE2020-2026
SE2020-2026
SE Hatchback2020-2026
XLE2020-2022
XSE2020-2026
XSE Hatchback2020-2026
SE Apex Edition2021-2022
SE Nightshade Edition2021-2022
SE Nightshade Edition Hatchback2021-2022
XSE Apex Edition2021-2022
SE CVT2022
Hybrid SE2023-2026
Hybrid SE Infrared2023
Hybrid XLE2023-2026
Hybrid Nightshade2024
Nightshade2024
FX2025-2026
Nightshade Hatchback2025

Factory wheel sizes

Wheel sizes Toyota fitted to the 2020-2026 Toyota Corolla from the factory. Offsets are ET in millimeters.

Factory size
15x6.5 +40
16x7 +40
16x7 +50
17x7 +40
17x7.5 +40
17x7.5 +50
18x8 +40

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2020-2026 Toyota Corolla: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
15-19"6.5"+4 to +50
15-19"7"+10 to +56
15-19"7.5"+17 to +52
15-19"8"+23 to +45
15-19"8.5"+29 to +39

Wider still: 15x9.5 +21 to +32; 16x9.5 +21 to +32; 17x9.5 +21 to +32; 18x9.5 +21 to +32; 19x9.5 +21 to +32 fit with modifications (roll front and rear fender lips, front camber bolts for extra negative camber, hub-centric rings for aftermarket wheels).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2020-2026 Toyota Corolla. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (roll front and rear fender lips, front camber bolts for extra negative camber, hub-centric rings for aftermarket wheels)

FAQ

What is the bolt pattern of the 2020-2026 Toyota Corolla?

The 2020-2026 Toyota Corolla (E210) uses a 5X100 bolt pattern and a 54.1 mm center bore.

What size wheels came on the 2020-2026 Toyota Corolla from the factory?

Factory sizes: 15x6.5 +40; 16x7 +40; 16x7 +50; 17x7 +40; 17x7.5 +40; 17x7.5 +50; 18x8 +40.

What lug thread size does the 2020-2026 Toyota Corolla use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2020-2026 Toyota Corolla without modifications?

Bolt-on sizes run from 15" to 19" in diameter; see the size table for the offset range at each width.