Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Toyota Land Cruiser built from 1998 to 2007.
Every 1998-2007 Toyota Land Cruiser uses a 5X150 bolt pattern with a 110.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 110.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Toyota Land Cruiser (J100) and the model years each was sold. All of them share the 5X150 bolt pattern.
| Submodel | Years |
|---|---|
| 100 Series | 1998-2007 |
Wheel sizes Toyota fitted to the 1998-2007 Toyota Land Cruiser from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 16x5.5 +0 |
| 16x6.5 +0 |
| 16x7 -25 |
| 16x8 +0 |
| 16x8 +60 |
| 17x8 +60 |
| 18x8 +60 |
Widths and offsets with Verified Fitment on the 1998-2007 Toyota Land Cruiser: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-18" | 5.5" | -30 to +10 |
| 16-18" | 6" | -30 to +12 |
| 16-18" | 6.5" | -30 to +5 |
| 16-18" | 7" | -30 to -1 |
| 16-18" | 7.5" | -30 to -7 |
| 16-18" | 8" | -29 to -14 |
Wider still: 16x8.5 -30 to -14; 16x9 -30 to -20; 17x8.5 -30 to -14; 17x9 -30 to -20; 18x8.5 -30 to -14; 18x9 -30 to -20 fit with modifications (2-3 in. leveling kit, trim front bumper valance and mud flaps, trim or heat-form fender liners at full lock).
The 1998-2007 Toyota Land Cruiser (J100) uses a 5X150 bolt pattern and a 110.1 mm center bore.
Factory sizes: 16x5.5 +0; 16x6.5 +0; 16x7 -25; 16x8 +0; 16x8 +60; 17x8 +60; 18x8 +60.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 16" to 18" in diameter; see the size table for the offset range at each width.