Acura MDX 3rd Gen (YD3) 2014-2016 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Acura MDX built from 2014 to 2016 (Base, Technology, Advance, Entertainment).

Fitment specs

Bolt pattern5X114.3
Center bore64.1 mm
Lug threadM12x1.5
Model years2014-2016
Generation3rd Gen (YD3)

Every 2014-2016 Acura MDX uses a 5X114.3 bolt pattern with a 64.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 64.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Acura MDX (3rd Gen (YD3)) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYears
Base2014-2016
Technology2014-2016
Advance2014-2016
Entertainment2014-2016

Factory wheel sizes

Wheel sizes Acura fitted to the 2014-2016 Acura MDX from the factory. Offsets are ET in millimeters.

Factory size
18x8 +55
18x8.5 +50
19x8 +55
19x8.5 +50
20x8 +55
20x9 +50

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2014-2016 Acura MDX: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
18-19"8"+31 to +58
18-19"8.5"+38 to +51

Wider still: 18x9 +24 to +47; 18x9.5 +31 to +40; 19x9 +24 to +47; 19x9.5 +31 to +40; 20x9 +24 to +47; 20x9.5 +31 to +40 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2014-2016 Acura MDX. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)

FAQ

What is the bolt pattern of the 2014-2016 Acura MDX?

The 2014-2016 Acura MDX (3rd Gen (YD3)) uses a 5X114.3 bolt pattern and a 64.1 mm center bore.

What size wheels came on the 2014-2016 Acura MDX from the factory?

Factory sizes: 18x8 +55; 18x8.5 +50; 19x8 +55; 19x8.5 +50; 20x8 +55; 20x9 +50.

What lug thread size does the 2014-2016 Acura MDX use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2014-2016 Acura MDX without modifications?

Bolt-on sizes run from 18" to 19" in diameter; see the size table for the offset range at each width.