Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Acura MDX built from 2022 to 2026 (Base, Technology, A-Spec, Advance, Type S, Type S Advance).
Every 2022-2026 Acura MDX uses a 5X120 bolt pattern with a 64.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 64.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Acura MDX (4th Gen) and the model years each was sold. All of them share the 5X120 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Base | 2022-2026 | See factory sizes below |
| Technology | 2022-2026 | See factory sizes below |
| A-Spec | 2022-2026 | See factory sizes below |
| Advance | 2022-2026 | See factory sizes below |
| Type S | 2022-2026 | 21x9.5 |
| Type S Advance | 2022-2026 | See factory sizes below |
Wheel sizes Acura fitted to the 2022-2026 Acura MDX from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 19x8.5 +55 |
| 20x9 +55 |
| 21x9.5 +55 |
Widths and offsets with Verified Fitment on the 2022-2026 Acura MDX: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 19-22" | 8.5" | +24 to +65 |
| 19-22" | 9" | +30 to +64 |
| 19-22" | 9.5" | +37 to +57 |
Wider still: 19x10 +27 to +51; 19x10.5 +34 to +45; 20x10 +27 to +51; 20x10.5 +34 to +45; 21x10 +27 to +51; 21x10.5 +34 to +45… fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2022-2026 Acura MDX. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.












Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)
The 2022-2026 Acura MDX (4th Gen) uses a 5X120 bolt pattern and a 64.1 mm center bore.
Factory sizes: 19x8.5 +55; 20x9 +55; 21x9.5 +55.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 19" to 22" in diameter; see the size table for the offset range at each width.