Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Dodge Viper built from 1996 to 2002 (RT/10, GTS, GTS ACR).
Every 1996-2002 Dodge Viper uses a 6X114.3 bolt pattern with a 71.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is 1/2"-20UNF. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Dodge Viper (SR II) and the model years each was sold. All of them share the 6X114.3 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| RT/10 | 1996-2002 | 17x10 +51 front / 17x13 +71 rear 18x10 +51 front / 18x13 +71 rear |
| GTS | 1996-2002 | 17x10 +51 front / 17x13 +71 rear 18x10 +51 front / 18x13 +71 rear |
| GTS ACR | 1999-2002 | See factory sizes below |
Wheel sizes Dodge fitted to the 1996-2002 Dodge Viper from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x10 +51 front / 17x13 +71 rear |
| 18x10 +51 front / 18x13 +71 rear |
Widths and offsets with Verified Fitment on the 1996-2002 Dodge Viper: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 17-19" | 10" | +34 to +57 | — |
| 17-19" | 10.5" | +40 to +50 | — |
| 17-19" | 13" | — | +54 to +75 |
| 17-19" | 13.5" | — | +60 to +70 |
Wider still: 17x14.5 front — / rear +52 to +63; 18x14.5 front — / rear +52 to +63; 19x14.5 front — / rear +52 to +63 fit with modifications (roll rear fender lips, adjustable rear camber/toe for wider rear wheels, hub-centric rings for aftermarket wheels).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 17-19" | 10" | +34 to +57 | — |
| 17-19" | 10.5" | +40 to +50 | — |
| 17-19" | 13" | — | +54 to +75 |
| 17-19" | 13.5" | — | +60 to +70 |
Wider still: 17x14.5 front — / rear +52 to +63; 18x14.5 front — / rear +52 to +63; 19x14.5 front — / rear +52 to +63 fit with modifications (roll rear fender lips, adjustable rear camber/toe for wider rear wheels, hub-centric rings for aftermarket wheels).
The 1996-2002 Dodge Viper (SR II) uses a 6X114.3 bolt pattern and a 71.5 mm center bore.
Factory sizes: 17x10 +51 front / 17x13 +71 rear; 18x10 +51 front / 18x13 +71 rear.
Its wheel fasteners use a 1/2"-20UNF thread.
Bolt-on sizes run from 17" to 19" in diameter; see the size table for the offset range at each width.