Dodge Viper (VX) 2013-2017 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Dodge Viper built from 2013 to 2017 (SRT, GT, GTC, GTS, TA, ACR).

Fitment specs

Bolt pattern6X114.3
Center bore71.5 mm
Lug thread1/2"-20UNF
Model years2013-2017
GenerationVX

Every 2013-2017 Dodge Viper uses a 6X114.3 bolt pattern with a 71.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is 1/2"-20UNF. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Dodge Viper (VX) and the model years each was sold. All of them share the 6X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
SRT2013-201718x10.5 +50.8 front / 19x13 +71.1 rear
GT2016-2017See factory sizes below
GTC2015-2017See factory sizes below
GTS2013-2017See factory sizes below
TA2014-2017See factory sizes below
ACR2016-2017See factory sizes below

Factory wheel sizes

Wheel sizes Dodge fitted to the 2013-2017 Dodge Viper from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x10.5 +50.8 front / 19x13 +71.1 rear

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2013-2017 Dodge Viper: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

SRT

DiameterWidthFront offsetRear offset
18-20"10.5"+34 to +56—
18-20"11"+40 to +50—
19-20"13"—+54 to +75
19-20"13.5"—+60 to +70

Wider still: 19x14.5 front — / rear +52 to +64; 20x14.5 front — / rear +52 to +64 fit with modifications (roll rear fender lips, adjustable rear camber/toe for wider rear wheels, hub-centric rings for aftermarket wheels).

GT, GTC, GTS, TA, ACR

DiameterWidthFront offsetRear offset
18-20"10.5"+34 to +56—
18-20"11"+40 to +50—
18-20"13"—+54 to +75
18-20"13.5"—+60 to +70

Wider still: 18x14.5 front — / rear +52 to +64; 19x14.5 front — / rear +52 to +64; 20x14.5 front — / rear +52 to +64 fit with modifications (roll rear fender lips, adjustable rear camber/toe for wider rear wheels, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 2013-2017 Dodge Viper?

The 2013-2017 Dodge Viper (VX) uses a 6X114.3 bolt pattern and a 71.5 mm center bore.

What size wheels came on the 2013-2017 Dodge Viper from the factory?

Factory sizes: 18x10.5 +50.8 front / 19x13 +71.1 rear.

What lug thread size does the 2013-2017 Dodge Viper use?

Its wheel fasteners use a 1/2"-20UNF thread.

What aftermarket wheel sizes fit the 2013-2017 Dodge Viper without modifications?

Bolt-on sizes run from 18" to 20" in diameter; see the size table for the offset range at each width.