Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Dodge Viper built from 2003 to 2006 (SRT10 Convertible, SRT10 Coupe).
Every 2003-2006 Dodge Viper uses a 6X114.3 bolt pattern with a 71.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is 1/2"-20UNF. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Dodge Viper (ZB) and the model years each was sold. All of them share the 6X114.3 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| SRT10 Convertible | 2003-2006 | 18x10 +50.8 front / 19x13 +71.1 rear |
| SRT10 Coupe | 2003-2006 | 18x10 +50.8 front / 19x13 +71.1 rear |
Wheel sizes Dodge fitted to the 2003-2006 Dodge Viper from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 18x10 +50.8 front / 19x13 +71.1 rear |
| 18x11 +49 front / 19x13 +71.1 rear |
Widths and offsets with Verified Fitment on the 2003-2006 Dodge Viper: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18-20" | 10" | +34 to +56 | — |
| 18-20" | 10.5" | +40 to +50 | — |
| 19-20" | 13" | — | +54 to +75 |
| 19-20" | 13.5" | — | +60 to +70 |
Wider still: 19x14.5 front — / rear +52 to +64; 20x14.5 front — / rear +52 to +64 fit with modifications (roll rear fender lips, adjustable rear camber/toe for wider rear wheels, hub-centric rings for aftermarket wheels).
The 2003-2006 Dodge Viper (ZB) uses a 6X114.3 bolt pattern and a 71.5 mm center bore.
Factory sizes: 18x10 +50.8 front / 19x13 +71.1 rear; 18x11 +49 front / 19x13 +71.1 rear.
Its wheel fasteners use a 1/2"-20UNF thread.
Bolt-on sizes run from 18" to 20" in diameter; see the size table for the offset range at each width.