Dodge Viper (ZB2) 2008-2010 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Dodge Viper built from 2008 to 2010 (SRT-10, ACR).

Fitment specs

Bolt pattern6X114.3
Center bore71.5 mm
Lug thread1/2"-20UNF
Model years2008-2010
GenerationZB2

Every 2008-2010 Dodge Viper uses a 6X114.3 bolt pattern with a 71.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is 1/2"-20UNF. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Dodge Viper (ZB2) and the model years each was sold. All of them share the 6X114.3 bolt pattern.

SubmodelYears
SRT-102008-2010
ACR2008-2010

Factory wheel sizes

Wheel sizes Dodge fitted to the 2008-2010 Dodge Viper from the factory. Offsets are ET in millimeters.

Factory size
18x10 +50.8 front / 19x13 +71.1 rear
19x10 +50 front / 20x13 +70 rear

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2008-2010 Dodge Viper: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthFront offsetRear offset
18-21"10"+34 to +56—
18-21"10.5"+40 to +50—
18-21"13"—+54 to +75
18-21"13.5"—+60 to +70

Wider still: 18x14.5 front — / rear +52 to +64; 19x14.5 front — / rear +52 to +64; 20x14.5 front — / rear +52 to +64; 21x14.5 front — / rear +52 to +64 fit with modifications (roll rear fender lips, adjustable rear camber/toe for wider rear wheels, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 2008-2010 Dodge Viper?

The 2008-2010 Dodge Viper (ZB2) uses a 6X114.3 bolt pattern and a 71.5 mm center bore.

What size wheels came on the 2008-2010 Dodge Viper from the factory?

Factory sizes: 18x10 +50.8 front / 19x13 +71.1 rear; 19x10 +50 front / 20x13 +70 rear.

What lug thread size does the 2008-2010 Dodge Viper use?

Its wheel fasteners use a 1/2"-20UNF thread.

What aftermarket wheel sizes fit the 2008-2010 Dodge Viper without modifications?

Bolt-on sizes run from 18" to 21" in diameter; see the size table for the offset range at each width.