Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Honda Civic built from 2016 to 2021 (LX, Sport, EX, EX-T, EX-L, Touring, Sport Touring, Si).
Every 2016-2021 Honda Civic uses a 5X114.3 bolt pattern with a 64.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 64.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Honda Civic (10th Gen (FC/FK)) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years |
|---|---|
| LX | 2016-2021 |
| Sport | 2017-2021 |
| EX | 2016-2021 |
| EX-T | 2016-2017 |
| EX-L | 2016-2021 |
| Touring | 2016-2021 |
| Sport Touring | 2017-2021 |
| Si | 2017-2020 |
Wheel sizes Honda fitted to the 2016-2021 Honda Civic from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 16x7 +45 |
| 17x7 +45 |
| 18x8 +50 |
Widths and offsets with Verified Fitment on the 2016-2021 Honda Civic: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-19" | 7" | +7 to +55 |
| 16-19" | 7.5" | +13 to +61 |
| 16-19" | 8" | +19 to +57 |
| 16-19" | 8.5" | +26 to +50 |
| 16-19" | 9" | +32 to +44 |
| 16-19" | 9.5" | +38 |
Wider still: 16x10 +25 to +34; 17x10 +25 to +34; 18x10 +25 to +34; 19x10 +25 to +34 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2016-2021 Honda Civic. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.












Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)







The 2016-2021 Honda Civic (10th Gen (FC/FK)) uses a 5X114.3 bolt pattern and a 64.1 mm center bore.
Factory sizes: 16x7 +45; 17x7 +45; 18x8 +50.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 16" to 19" in diameter; see the size table for the offset range at each width.