Honda Civic 9th Gen (FB/FG) 2012-2015 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Honda Civic built from 2012 to 2015 (DX, LX, HF, SE, EX, EX-L, Si, Hybrid, Natural Gas).

Fitment specs

Bolt pattern5X114.3
Center bore64.1 mm
Lug threadM12x1.5
Model years2012-2015
Generation9th Gen (FB/FG)

Every 2012-2015 Honda Civic uses a 5X114.3 bolt pattern with a 64.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 64.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Honda Civic (9th Gen (FB/FG)) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYears
DX2012
LX2012-2015
HF2012-2015
SE2014-2015
EX2012-2015
EX-L2012-2015
Si2012-2015
Hybrid2012-2015
Natural Gas2012-2015

Factory wheel sizes

Wheel sizes Honda fitted to the 2012-2015 Honda Civic from the factory. Offsets are ET in millimeters.

Factory size
15x6 +45
16x6.5 +45
17x6.5 +45
17x7 +45
17x7.5 +45
18x7.5 +45
18x7.5 +47

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2012-2015 Honda Civic: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
15-18"6"+4 to +55
15-18"6.5"+10 to +61
15-18"7"+16 to +56
15-18"7.5"+23 to +49
15-18"8"+29 to +43
15-18"8.5"+35 to +37

Wider still: 15x9 +25 to +38; 16x9 +25 to +38; 17x9 +25 to +38; 18x9 +25 to +38 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2012-2015 Honda Civic. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)

FAQ

What is the bolt pattern of the 2012-2015 Honda Civic?

The 2012-2015 Honda Civic (9th Gen (FB/FG)) uses a 5X114.3 bolt pattern and a 64.1 mm center bore.

What size wheels came on the 2012-2015 Honda Civic from the factory?

Factory sizes: 15x6 +45; 16x6.5 +45; 17x6.5 +45; 17x7 +45; 17x7.5 +45; 18x7.5 +45; 18x7.5 +47.

What lug thread size does the 2012-2015 Honda Civic use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2012-2015 Honda Civic without modifications?

Bolt-on sizes run from 15" to 18" in diameter; see the size table for the offset range at each width.