Honda Civic (EK) 1996-2000 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Honda Civic built from 1996 to 2000 (CX, DX, HX, LX, EX, GX, Si).

Fitment specs

Bolt pattern4X100
Center bore56.1 mm
Lug threadM12x1.5
Model years1996-2000
GenerationEK

Every 1996-2000 Honda Civic uses a 4X100 bolt pattern with a 56.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 56.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Honda Civic (EK) and the model years each was sold. All of them share the 4X100 bolt pattern.

SubmodelYears
CX1996-2000
DX1996-2000
HX1996-2000
LX1996-2000
EX1996-2000
GX1998-2000
Si1999-2000

Factory wheel sizes

Wheel sizes Honda fitted to the 1996-2000 Honda Civic from the factory. Offsets are ET in millimeters.

Factory size
13x5 +45
14x5 +45
14x5.5 +45
15x6 +45
16x6.5 +45

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1996-2000 Honda Civic: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
13-16"5"+15 to +55
13-16"5.5"+22 to +57
13-16"6"+28 to +50
13-16"6.5"+34 to +44

Wider still: 13x7.5 +26 to +37; 14x7.5 +26 to +37; 15x7.5 +26 to +37; 16x7.5 +26 to +37 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

FAQ

What is the bolt pattern of the 1996-2000 Honda Civic?

The 1996-2000 Honda Civic (EK) uses a 4X100 bolt pattern and a 56.1 mm center bore.

What size wheels came on the 1996-2000 Honda Civic from the factory?

Factory sizes: 13x5 +45; 14x5 +45; 14x5.5 +45; 15x6 +45; 16x6.5 +45.

What lug thread size does the 1996-2000 Honda Civic use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 1996-2000 Honda Civic without modifications?

Bolt-on sizes run from 13" to 16" in diameter; see the size table for the offset range at each width.