Honda Civic 8th Gen (FA/FG) 2006-2011 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Honda Civic built from 2006 to 2011 (DX, LX, LX-S, EX, EX-L, Si, Hybrid, GX).

Fitment specs

Bolt pattern5X114.3
Center bore64.1 mm
Lug threadM12x1.5
Model years2006-2011
Generation8th Gen (FA/FG)

Every 2006-2011 Honda Civic uses a 5X114.3 bolt pattern with a 64.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 64.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Honda Civic (8th Gen (FA/FG)) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
DX2006-2011See factory sizes below
LX2006-2011See factory sizes below
LX-S2009-2011See factory sizes below
EX2006-2011See factory sizes below
EX-L2009-2011See factory sizes below
Si2006-2011See factory sizes below
Hybrid2006-201115x6 +45
GX2006-2011See factory sizes below

Factory wheel sizes

Wheel sizes Honda fitted to the 2006-2011 Honda Civic from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
15x6 +45
16x6.5 +45
17x6.5 +45
17x7 +45
17x7.5 +45

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2006-2011 Honda Civic: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
15-18"6"+8 to +55
15-18"6.5"+14 to +61
15-18"7"+21 to +55
15-18"7.5"+27 to +49
15-18"8"+33 to +43

Wider still: 15x8.5 +19 to +47; 15x9 +25 to +41; 16x8.5 +19 to +47; 16x9 +25 to +41; 17x8.5 +19 to +47; 17x9 +25 to +41… fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2006-2011 Honda Civic. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)

FAQ

What is the bolt pattern of the 2006-2011 Honda Civic?

The 2006-2011 Honda Civic (8th Gen (FA/FG)) uses a 5X114.3 bolt pattern and a 64.1 mm center bore.

What size wheels came on the 2006-2011 Honda Civic from the factory?

Factory sizes: 15x6 +45; 16x6.5 +45; 17x6.5 +45; 17x7 +45; 17x7.5 +45.

What lug thread size does the 2006-2011 Honda Civic use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2006-2011 Honda Civic without modifications?

Bolt-on sizes run from 15" to 18" in diameter; see the size table for the offset range at each width.