Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz E-Class built from 1996 to 2002 (E300 Diesel, E320, E320 4MATIC, E420, E430, E55 AMG).
Every 1996-2002 Mercedes-Benz E-Class uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz E-Class (W210) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| E300 Diesel | 1996-1999 | See factory sizes below |
| E320 | 1996-2002 | 16x7.5 +41 17x7.5 +37 17x8 +37 18x8 +31 |
| E320 4MATIC | 1998-2002 | 17x8 +38 18x8 +30 18x8.5 +38 |
| E420 | 1996-1997 | 16x7.5 +41 17x7.5 +37 17x8 +37 18x8 +31 |
| E430 | 1998-2002 | 17x7.5 +37 17x8 +37 18x8 +31 18x9 +35 |
| E55 AMG | 1999-2002 | 18x8 +30 18x8 +30 front / 18x9 +39 rear 18x8 +30 front / 19x9 +39 rear 18x8.5 +38 18x8.5 +38 front / 18x9 +39 rear 18x8.5 +38 front / 18x9.5 +44 rear 19x8.5 +35 front / 19x9.5 +40 rear 20x8.5 +35 front / 20x9.5 +40 rear 20x9 +30 front / 20x10 +40 rear |
Wheel sizes Mercedes-Benz fitted to the 1996-2002 Mercedes-Benz E-Class from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 15x6.5 +37 |
| 15x7 +37 |
| 16x7.5 +41 |
| 17x7.5 +37 |
| 17x8 +37 |
| 18x8 +31 |
| 18x8 +37 |
| 18x9 +35 |
Widths and offsets with Verified Fitment on the 1996-2002 Mercedes-Benz E-Class: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 15-18" | 6.5" | +7 to +47 |
| 15-18" | 7" | +13 to +53 |
| 15-18" | 7.5" | +20 to +46 |
| 15-18" | 8" | +26 to +40 |
| 15-18" | 8.5" | +33 to +34 |
Wider still: 15x9 +18 to +33; 15x9.5 +25 to +27; 16x9 +18 to +33; 16x9.5 +25 to +27; 17x9 +18 to +33; 17x9.5 +25 to +27… fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
| Diameter | Width | Offset range |
|---|---|---|
| 16-18" | 7.5" | +20 to +46 |
| 16-18" | 8" | +26 to +40 |
| 16-18" | 8.5" | +33 to +34 |
Wider still: 16x9 +18 to +33; 16x9.5 +25 to +27; 17x9 +18 to +33; 17x9.5 +25 to +27; 18x9 +18 to +33; 18x9.5 +25 to +27 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
| Diameter | Width | Offset range |
|---|---|---|
| 17-18" | 8" | +26 to +40 |
| 17-18" | 8.5" | +33 to +34 |
Wider still: 17x9 +18 to +33; 17x9.5 +25 to +27; 18x9 +18 to +33; 18x9.5 +25 to +27 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
| Diameter | Width | Offset range |
|---|---|---|
| 17-18" | 7.5" | +20 to +46 |
| 17-18" | 8" | +26 to +40 |
| 17-18" | 8.5" | +33 to +34 |
Wider still: 17x9 +18 to +33; 17x9.5 +25 to +27; 18x9 +18 to +33; 18x9.5 +25 to +27 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
| Diameter | Width | Offset range |
|---|---|---|
| 18-20" | 8" | +26 to +40 |
| 18-20" | 8.5" | +33 to +34 |
Wider still: 18x9 +18 to +33; 18x9.5 +25 to +27; 19x9 +18 to +33; 19x9.5 +25 to +27; 20x9 +18 to +33; 20x9.5 +25 to +27 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 1996-2002 Mercedes-Benz E-Class. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.








Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)
















Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)















Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)
















Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)
















Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)












The 1996-2002 Mercedes-Benz E-Class (W210) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 15x6.5 +37; 15x7 +37; 16x7.5 +41; 17x7.5 +37; 17x8 +37; 18x8 +31; 18x8 +37; 18x9 +35.
Bolt-on sizes run from 15" to 20" in diameter; see the size table for the offset range at each width.