Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz E-Class built from 2003 to 2009 (E320, E320 4MATIC, E320 CDI, E320 BlueTEC, E350, E350 4MATIC, E500, E500 4MATIC, E550, E550 4MATIC, E55 AMG, E63 AMG).
Every 2003-2009 Mercedes-Benz E-Class uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz E-Class (W211) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| E320 | 2003-2005 | 16x7.5 +42 16x8 +36 17x8 +38 17x8.5 +38 18x8 +30 18x8.5 +38 18x9 +39 |
| E320 4MATIC | 2004-2005 | 17x8 +38 17x8.5 +38 18x8 +30 18x8.5 +38 18x9 +39 19x9.5 +31 |
| E320 CDI | 2005-2006 | 16x7.5 +42 16x8 +36 17x8 +38 17x8.5 +38 18x8 +30 18x8.5 +38 18x9 +39 |
| E320 BlueTEC | 2007-2008 | 16x7.5 +42 16x8 +36 17x8 +38 17x8.5 +38 18x8 +30 18x8.5 +38 18x8.5 +38 front / 18x9 +39 rear |
| E350 | 2006-2009 | 16x7.5 +42 16x8 +36 17x8 +38 17x8.5 +38 18x8 +30 18x8.5 +38 18x9 +39 |
| E350 4MATIC | 2006-2009 | 17x8 +38 17x8.5 +38 18x8 +30 18x8.5 +38 18x9 +39 19x9.5 +31 |
| E500 | 2003-2006 | 17x8 +38 17x8.5 +38 18x8 +30 18x8.5 +38 18x9 +39 19x10 +35 |
| E500 4MATIC | 2004-2006 | 17x8 +38 17x8.5 +38 18x8 +30 18x8.5 +38 18x9 +39 19x10 +35 |
| E550 | 2007-2009 | 17x8 +38 17x8.5 +38 18x8 +30 18x8 +30 front / 18x9 +39 rear 18x8.5 +38 18x8.5 +38 front / 18x9 +39 rear 19x8.5 +35 front / 19x9.5 +31 rear |
| E550 4MATIC | 2007-2009 | See factory sizes below |
| E55 AMG | 2003-2006 | 18x8 +30 18x8 +30 front / 18x9 +39 rear 18x8 +30 front / 19x9 +39 rear 18x8.5 +38 18x8.5 +38 front / 18x9 +39 rear 18x8.5 +38 front / 18x9.5 +44 rear 19x8.5 +35 front / 19x9.5 +40 rear 20x8.5 +35 front / 20x9.5 +40 rear 20x9 +30 front / 20x10 +40 rear |
| E63 AMG | 2007-2009 | 18x8 +30 18x8 +30 front / 18x9 +39 rear 18x8 +30 front / 19x9 +39 rear 18x8.5 +38 18x8.5 +38 front / 18x9 +39 rear 18x8.5 +38 front / 18x9.5 +44 rear 18x9 +37 front / 18x9.5 +52 rear 19x8.5 +35 front / 19x9.5 +40 rear 19x9 +37 front / 19x9.5 +52 rear 20x8.5 +35 front / 20x9.5 +40 rear 20x9 +30 front / 20x10 +40 rear 20x9 +35 front / 20x10 +45 rear |
Wheel sizes Mercedes-Benz fitted to the 2003-2009 Mercedes-Benz E-Class from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 16x7 +33 |
| 16x7.5 +42 |
| 16x8 +36 |
| 17x8 +38 |
| 17x8.5 +38 |
| 18x8 +30 |
| 18x8 +30 front / 18x9 +39 rear |
| 18x8.5 +38 |
| 18x8.5 +38 front / 18x9 +39 rear |
| 18x9 +39 |
| 19x8.5 +35 front / 19x9.5 +31 rear |
| 19x9.5 +31 |
| 19x10 +35 |
Widths and offsets with Verified Fitment on the 2003-2009 Mercedes-Benz E-Class: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 16-18" | 7.5" | +7 to +52 | +15 to +50 |
| 19" | 7.5" | +7 to +52 | — |
| 16-18" | 8" | +13 to +50 | +21 to +43 |
| 19" | 8" | +13 to +50 | — |
| 16-18" | 8.5" | +19 to +43 | +27 to +37 |
| 19" | 8.5" | +19 to +43 | — |
| 16-19" | 9" | +26 to +37 | — |
Wider still: 16x10 front +18 to +30 / rear —; 16x10.5 front +24 / rear —; 17x10 front +18 to +30 / rear —; 17x10.5 front +24 / rear —; 18x10 front +18 to +30 / rear —; 18x10.5 front +24 / rear —… fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 17-19" | 8" | +13 to +48 | +21 to +43 |
| 17-19" | 8.5" | +19 to +43 | +27 to +37 |
| 17-19" | 9" | +26 to +37 | — |
Wider still: 17x10 front +18 to +30 / rear —; 17x10.5 front +24 / rear —; 18x10 front +18 to +30 / rear —; 18x10.5 front +24 / rear —; 19x10 front +18 to +30 / rear —; 19x10.5 front +24 / rear — fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 16-18" | 7" | +0 to +43 | +8 to +43 |
| 19" | 7" | +0 to +43 | — |
| 16-18" | 7.5" | +7 to +49 | +15 to +49 |
| 19" | 7.5" | +7 to +49 | — |
| 16-18" | 8" | +13 to +50 | +21 to +43 |
| 19" | 8" | +13 to +50 | — |
| 16-18" | 8.5" | +19 to +43 | +27 to +37 |
| 19" | 8.5" | +19 to +43 | — |
| 16-19" | 9" | +26 to +37 | — |
Wider still: 16x10 front +18 to +30 / rear —; 16x10.5 front +24 / rear —; 17x10 front +18 to +30 / rear —; 17x10.5 front +24 / rear —; 18x10 front +18 to +30 / rear —; 18x10.5 front +24 / rear —… fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18-20" | 8" | +13 to +40 | +21 to +40 |
| 18-20" | 8.5" | +19 to +43 | +27 to +37 |
| 18-20" | 9" | +26 to +37 | — |
Wider still: 18x10 front +18 to +30 / rear —; 18x10.5 front +24 / rear —; 19x10 front +18 to +30 / rear —; 19x10.5 front +24 / rear —; 20x10 front +18 to +30 / rear —; 20x10.5 front +24 / rear — fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2003-2009 Mercedes-Benz E-Class. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.












Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)

















Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)

















Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)

















Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)





The 2003-2009 Mercedes-Benz E-Class (W211) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 16x7 +33; 16x7.5 +42; 16x8 +36; 17x8 +38; 17x8.5 +38; 18x8 +30; 18x8 +30 front / 18x9 +39 rear; 18x8.5 +38; 18x8.5 +38 front / 18x9 +39 rear; 18x9 +39; 19x8.5 +35 front / 19x9.5 +31 rear; 19x9.5 +31; 19x10 +35.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 16" to 20" in diameter; see the size table for the offset range at each width.