Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz E-Class built from 2024 to 2026 (E350 4MATIC, E450 4MATIC, AMG E53 Hybrid).
Every 2024-2026 Mercedes-Benz E-Class uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz E-Class (W214) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| E350 4MATIC | 2024-2026 | 18x8 +32 19x8.5 +35 19x8.5 +35 front / 19x9.5 +51 rear 20x8.5 +35 front / 20x9.5 +51 rear 21x8.5 +35 front / 21x9.5 +51 rear |
| E450 4MATIC | 2024-2026 | 18x8 +32 19x8.5 +35 19x8.5 +35 front / 19x9.5 +51 rear 20x8.5 +35 front / 20x9.5 +51 rear 21x8.5 +35 front / 21x9.5 +51 rear |
| AMG E53 Hybrid | 2025-2026 | See factory sizes below |
Wheel sizes Mercedes-Benz fitted to the 2024-2026 Mercedes-Benz E-Class from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 18x8 +32 |
| 19x8.5 +35 |
| 19x8.5 +35 front / 19x9.5 +51 rear |
| 20x8.5 +35 front / 20x9.5 +51 rear |
| 21x8.5 +35 front / 21x9.5 +51 rear |
Widths and offsets with Verified Fitment on the 2024-2026 Mercedes-Benz E-Class: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18-21" | 8" | +11 to +42 | +15 to +42 |
| 18-21" | 8.5" | +18 to +40 | +21 to +48 |
| 18-21" | 9" | +24 to +34 | +27 to +55 |
| 18-21" | 9.5" | — | +34 to +56 |
| 18-21" | 10" | — | +40 to +50 |
Wider still: 18x11 front — / rear +32 to +43; 19x11 front — / rear +32 to +43; 20x11 front — / rear +32 to +43; 21x11 front — / rear +32 to +43 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18-20" | 8" | +11 to +42 | +15 to +42 |
| 18-20" | 8.5" | +18 to +40 | +21 to +48 |
| 18-20" | 9" | +24 to +34 | +27 to +55 |
| 18-20" | 9.5" | — | +34 to +56 |
| 18-20" | 10" | — | +40 to +50 |
Wider still: 18x11 front — / rear +32 to +43; 19x11 front — / rear +32 to +43; 20x11 front — / rear +32 to +43 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2024-2026 Mercedes-Benz E-Class. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.












Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)
















Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)
The 2024-2026 Mercedes-Benz E-Class (W214) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 18x8 +32; 19x8.5 +35; 19x8.5 +35 front / 19x9.5 +51 rear; 20x8.5 +35 front / 20x9.5 +51 rear; 21x8.5 +35 front / 21x9.5 +51 rear.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 18" to 21" in diameter; see the size table for the offset range at each width.