Nissan Maxima (A35) 2009-2014 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Nissan Maxima built from 2009 to 2014 (3.5 S, 3.5 SV).

Fitment specs

Bolt pattern5X114.3
Center bore66.1 mm
Lug threadM12x1.25
Model years2009-2014
GenerationA35

Every 2009-2014 Nissan Maxima uses a 5X114.3 bolt pattern with a 66.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Nissan Maxima (A35) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYears
3.5 S2009-2014
3.5 SV2009-2014

Factory wheel sizes

Wheel sizes Nissan fitted to the 2009-2014 Nissan Maxima from the factory. Offsets are ET in millimeters.

Factory size
18x8 +50
19x8 +50

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2009-2014 Nissan Maxima: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
18-20"8"+33 to +55
18-20"8.5"+39 to +49

Wider still: 18x9.5 +31 to +42; 19x9.5 +31 to +42; 20x9.5 +31 to +42 fit with modifications (roll front and rear fender lips, front camber bolts (strut) for -1° or more, hub-centric rings if the wheel bore is larger).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2009-2014 Nissan Maxima. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (roll front and rear fender lips, front camber bolts (strut) for -1° or more, hub-centric rings if the wheel bore is larger)

FAQ

What is the bolt pattern of the 2009-2014 Nissan Maxima?

The 2009-2014 Nissan Maxima (A35) uses a 5X114.3 bolt pattern and a 66.1 mm center bore.

What size wheels came on the 2009-2014 Nissan Maxima from the factory?

Factory sizes: 18x8 +50; 19x8 +50.

What lug thread size does the 2009-2014 Nissan Maxima use?

Its wheel fasteners use a M12x1.25 thread.

What aftermarket wheel sizes fit the 2009-2014 Nissan Maxima without modifications?

Bolt-on sizes run from 18" to 20" in diameter; see the size table for the offset range at each width.