Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the BMW M3 built from 2015 to 2018 (Base, CS).
Every 2015-2018 BMW M3 uses a 5X120 bolt pattern with a 72.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 72.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the BMW M3 (F80) and the model years each was sold. All of them share the 5X120 bolt pattern.
| Submodel | Years |
|---|---|
| Base | 2015-2018 |
| CS | 2018 |
Wheel sizes BMW fitted to the 2015-2018 BMW M3 from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 18x8.5 +27 front / 18x9 +29 rear |
| 18x9 +29 front / 18x10 +40 rear |
| 19x8.5 +27 front / 19x9 +29 rear |
| 19x9 +29 front / 19x10 +40 rear |
| 20x9 +29 front / 20x10 +40 rear |
Widths and offsets with Verified Fitment on the 2015-2018 BMW M3: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18-21" | 9" | +12 to +38 | — |
| 18-21" | 9.5" | +18 to +32 | — |
| 18-21" | 10" | +25 | +23 to +45 |
| 18-21" | 10.5" | — | +29 to +39 |
Wider still: 18x11.5 front — / rear +21 to +32; 19x11.5 front — / rear +21 to +32; 20x11.5 front — / rear +21 to +32; 21x11.5 front — / rear +21 to +32 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2015-2018 BMW M3. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.



Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)
The 2015-2018 BMW M3 (F80) uses a 5X120 bolt pattern and a 72.6 mm center bore.
Factory sizes: 18x8.5 +27 front / 18x9 +29 rear; 18x9 +29 front / 18x10 +40 rear; 19x8.5 +27 front / 19x9 +29 rear; 19x9 +29 front / 19x10 +40 rear; 20x9 +29 front / 20x10 +40 rear.
Its wheel fasteners use a M14x1.25 thread.
Bolt-on sizes run from 18" to 21" in diameter; see the size table for the offset range at each width.