BMW M3 (G80/G81) 2021-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the BMW M3 built from 2021 to 2026 (Base, Competition, Competition xDrive, CS).

Fitment specs

Bolt pattern5X112
Center bore66.6 mm
Lug threadM14x1.25
Model years2021-2026
GenerationG80/G81

Every 2021-2026 BMW M3 uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the BMW M3 (G80/G81) and the model years each was sold. All of them share the 5X112 bolt pattern.

SubmodelYearsFactory wheel sizes
Base2021-2026See factory sizes below
Competition2021-202618x9.5 +20 front / 19x10.5 +20 rear
19x9 +20 front / 19x9.5 +20 rear
19x9.5 +20 front / 20x10.5 +20 rear
20x9.5 +20 front / 21x10.5 +20 rear
Competition xDrive2022-202618x9.5 +20 front / 19x10.5 +20 rear
19x9 +20 front / 19x9.5 +20 rear
19x9.5 +20 front / 20x10.5 +20 rear
CS2024-202518x9.5 +20 front / 19x10.5 +20 rear
19x9 +20 front / 19x9.5 +20 rear
19x9.5 +20 front / 20x10.5 +20 rear

Factory wheel sizes

Wheel sizes BMW fitted to the 2021-2026 BMW M3 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x9.5 +20 front / 19x10.5 +20 rear
19x9 +20 front / 19x9.5 +20 rear
19x9.5 +20 front / 20x10.5 +20 rear
20x9.5 +20 front / 21x10.5 +20 rear

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2021-2026 BMW M3: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Base

DiameterWidthFront offsetRear offset
18-20"9.5"+3 to +25—
18-20"10"+9 to +19—
18-20"10.5"—+3 to +25
18-20"11"—+9 to +19

Wider still: 18x12 front — / rear +1 to +12; 19x12 front — / rear +1 to +12; 20x12 front — / rear +1 to +12 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

Competition, Competition xDrive, CS

DiameterWidthFront offsetRear offset
18-20"9.5"+3 to +25—
18-20"10"+9 to +19—
19-20"10.5"—+3 to +25
19-20"11"—+9 to +19

Wider still: 19x12 front — / rear +1 to +12; 20x12 front — / rear +1 to +12 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2021-2026 BMW M3. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Base

Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)

Competition, Competition xDrive, CS

Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)

FAQ

What is the bolt pattern of the 2021-2026 BMW M3?

The 2021-2026 BMW M3 (G80/G81) uses a 5X112 bolt pattern and a 66.6 mm center bore.

What size wheels came on the 2021-2026 BMW M3 from the factory?

Factory sizes: 18x9.5 +20 front / 19x10.5 +20 rear; 19x9 +20 front / 19x9.5 +20 rear; 19x9.5 +20 front / 20x10.5 +20 rear; 20x9.5 +20 front / 21x10.5 +20 rear.

What lug thread size does the 2021-2026 BMW M3 use?

Its wheel fasteners use a M14x1.25 thread.

What aftermarket wheel sizes fit the 2021-2026 BMW M3 without modifications?

Bolt-on sizes run from 18" to 20" in diameter; see the size table for the offset range at each width.