Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Mazda MX-5 Miata built from 1990 to 1998 (Base, LS).
Every 1990-1998 Mazda MX-5 Miata uses a 4X100 bolt pattern with a 54.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 54.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mazda MX-5 Miata (NA) and the model years each was sold. All of them share the 4X100 bolt pattern.
| Submodel | Years |
|---|---|
| Base | 1990-1998 |
| LS | 1994-1998 |
Wheel sizes Mazda fitted to the 1990-1998 Mazda MX-5 Miata from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 14x5.5 +40 |
| 14x6 +40 |
| 15x6 +40 |
| 15x6.5 +42 |
| 16x6.5 +38 |
| 16x7 +38 |
Widths and offsets with Verified Fitment on the 1990-1998 Mazda MX-5 Miata: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 14-18" | 5.5" | -6 to +50 |
| 14-18" | 6" | +0 to +44 |
| 14-18" | 6.5" | +6 to +38 |
| 14-18" | 7" | +13 to +31 |
| 14-18" | 7.5" | +19 to +25 |
The 1990-1998 Mazda MX-5 Miata (NA) uses a 4X100 bolt pattern and a 54.1 mm center bore.
Factory sizes: 14x5.5 +40; 14x6 +40; 15x6 +40; 15x6.5 +42; 16x6.5 +38; 16x7 +38.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 14" to 18" in diameter; see the size table for the offset range at each width.