Mazda MX-5 Miata (NB) 1999-2005 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Mazda MX-5 Miata built from 1999 to 2005 (Base, LS, Mazdaspeed).

Fitment specs

Bolt pattern4X100
Center bore54.1 mm
Lug threadM12x1.5
Model years1999-2005
GenerationNB

Every 1999-2005 Mazda MX-5 Miata uses a 4X100 bolt pattern with a 54.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 54.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Mazda MX-5 Miata (NB) and the model years each was sold. All of them share the 4X100 bolt pattern.

SubmodelYears
Base1999-2005
LS1999-2005
Mazdaspeed2004-2005

Factory wheel sizes

Wheel sizes Mazda fitted to the 1999-2005 Mazda MX-5 Miata from the factory. Offsets are ET in millimeters.

Factory size
14x6 +40
15x6 +40
16x6.5 +40
16x6.5 +42
17x7 +38
17x7 +40
17x7 +42

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1999-2005 Mazda MX-5 Miata: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
14-18"6"+0 to +50
14-18"6.5"+6 to +54
14-18"7"+13 to +47
14-18"7.5"+19 to +41
14-18"8"+25 to +35

Wider still: 14x8.5 +23 to +34; 15x8.5 +23 to +34; 16x8.5 +23 to +34; 17x8.5 +23 to +34; 18x8.5 +23 to +34 fit with modifications (roll front and rear fender lips, front camber bolts for -1°, hub-centric rings if the wheel bore is larger).

FAQ

What is the bolt pattern of the 1999-2005 Mazda MX-5 Miata?

The 1999-2005 Mazda MX-5 Miata (NB) uses a 4X100 bolt pattern and a 54.1 mm center bore.

What size wheels came on the 1999-2005 Mazda MX-5 Miata from the factory?

Factory sizes: 14x6 +40; 15x6 +40; 16x6.5 +40; 16x6.5 +42; 17x7 +38; 17x7 +40; 17x7 +42.

What lug thread size does the 1999-2005 Mazda MX-5 Miata use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 1999-2005 Mazda MX-5 Miata without modifications?

Bolt-on sizes run from 14" to 18" in diameter; see the size table for the offset range at each width.