Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mazda MX-5 Miata built from 2016 to 2026 (Sport, Club, Grand Touring, RF Club, RF Grand Touring).
Every 2016-2026 Mazda MX-5 Miata uses a 4X100 bolt pattern with a 54.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 54.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mazda MX-5 Miata (ND) and the model years each was sold. All of them share the 4X100 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Sport | 2016-2026 | 16x6.5 +45 16x7 +45 |
| Club | 2016-2026 | 17x7 +45 |
| Grand Touring | 2016-2026 | 17x7 +45 |
| RF Club | 2017-2026 | 17x7 +45 |
| RF Grand Touring | 2017-2026 | 17x7 +45 |
Wheel sizes Mazda fitted to the 2016-2026 Mazda MX-5 Miata from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 16x6.5 +45 |
| 16x7 +45 |
| 17x7 +45 |
| 18x7 +45 |
Widths and offsets with Verified Fitment on the 2016-2026 Mazda MX-5 Miata: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-17" | 6.5" | +11 to +55 |
| 16-17" | 7" | +18 to +61 |
| 16-17" | 7.5" | +24 to +54 |
| 16-17" | 8" | +30 to +48 |
| 16-17" | 8.5" | +37 to +42 |
Wider still: 16x9 +20 to +35; 17x9 +20 to +35 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
| Diameter | Width | Offset range |
|---|---|---|
| 17" | 7" | +18 to +55 |
| 17" | 7.5" | +24 to +54 |
| 17" | 8" | +30 to +48 |
| 17" | 8.5" | +37 to +42 |
Wider still: 17x9 +20 to +35 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
The 2016-2026 Mazda MX-5 Miata (ND) uses a 4X100 bolt pattern and a 54.1 mm center bore.
Factory sizes: 16x6.5 +45; 16x7 +45; 17x7 +45; 18x7 +45.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 16" to 17" in diameter; see the size table for the offset range at each width.