Mercedes-Benz SL-Class (R129) 1990-2001 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz SL-Class built from 1990 to 2001 (300SL, 500SL, 600SL, SL320, SL500, SL600).

Fitment specs

Bolt pattern5X112
Center bore66.6 mm
Lug threadM12x1.5
Model years1990-2001
GenerationR129

Every 1990-2001 Mercedes-Benz SL-Class uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Mercedes-Benz SL-Class (R129) and the model years each was sold. All of them share the 5X112 bolt pattern.

SubmodelYearsFactory wheel sizes
300SL1990-199317x8.5 +34
500SL1990-1993See factory sizes below
600SL1993See factory sizes below
SL3201994-199717x8.5 +34
SL5001994-200117x8.5 +35
18x8.5 +30
18x8.5 +35
18x8.5 +30 front / 18x9.5 +33 rear
18x8.5 +35 front / 18x9.5 +40 rear
19x8.5 +30 front / 19x9.5 +31 rear
19x8.5 +35 front / 19x9.5 +40 rear
SL6001994-200117x8.5 +34
18x8.5 +25
18x9.5 +23
19x10 +20

Factory wheel sizes

Wheel sizes Mercedes-Benz fitted to the 1990-2001 Mercedes-Benz SL-Class from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
16x8 +34
17x8.5 +34
18x8.5 +25
18x8.5 +25 front / 18x9.5 +23 rear
18x9.5 +23
19x10 +20

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1990-2001 Mercedes-Benz SL-Class: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

300SL, SL320, SL600

DiameterWidthOffset range
17-19"8.5"+17 to +39
17-19"9"+23 to +33

Wider still: 17x10 +15 to +26; 18x10 +15 to +26; 19x10 +15 to +26 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).

500SL, 600SL

DiameterWidthOffset range
16-19"8.5"+17 to +39
16-19"9"+23 to +33

Wider still: 16x10 +15 to +26; 17x10 +15 to +26; 18x10 +15 to +26; 19x10 +15 to +26 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).

SL500

DiameterWidthOffset range
17-19"8.5"+17 to +39
17-19"9"+23 to +33

Wider still: 17x10 +15 to +26; 18x10 +15 to +26; 19x10 +15 to +26 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 1990-2001 Mercedes-Benz SL-Class. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

300SL, SL320, SL600

Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)

500SL, 600SL

Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)

SL500

Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)

FAQ

What is the bolt pattern of the 1990-2001 Mercedes-Benz SL-Class?

The 1990-2001 Mercedes-Benz SL-Class (R129) uses a 5X112 bolt pattern and a 66.6 mm center bore.

What size wheels came on the 1990-2001 Mercedes-Benz SL-Class from the factory?

Factory sizes: 16x8 +34; 17x8.5 +34; 18x8.5 +25; 18x8.5 +25 front / 18x9.5 +23 rear; 18x9.5 +23; 19x10 +20.

What lug thread size does the 1990-2001 Mercedes-Benz SL-Class use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 1990-2001 Mercedes-Benz SL-Class without modifications?

Bolt-on sizes run from 16" to 19" in diameter; see the size table for the offset range at each width.