Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz SL-Class built from 2003 to 2012 (SL500, SL550, SL600, SL55 AMG, SL63 AMG, SL65 AMG).
Every 2003-2012 Mercedes-Benz SL-Class uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz SL-Class (R230) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| SL500 | 2003-2006 | 17x8.5 +35 18x8.5 +30 18x8.5 +35 18x8.5 +30 front / 18x9.5 +33 rear 18x8.5 +35 front / 18x9.5 +40 rear 18x9.5 +33 18x9.5 +40 19x8.5 +30 front / 19x9.5 +31 rear 19x8.5 +35 front / 19x9.5 +40 rear 19x9.5 +31 19x9.5 +40 |
| SL550 | 2007-2012 | 18x8.5 +30 front / 18x9.5 +33 rear 18x8.5 +35 front / 18x9.5 +40 rear 19x8.5 +30 front / 19x9.5 +31 rear 19x8.5 +35 front / 19x9.5 +40 rear |
| SL600 | 2004-2010 | 18x8.5 +30 18x8.5 +35 18x8.5 +30 front / 18x9.5 +33 rear 18x8.5 +35 front / 18x9.5 +40 rear 18x9.5 +33 18x9.5 +40 19x8.5 +30 front / 19x9.5 +31 rear 19x8.5 +35 front / 19x9.5 +40 rear 19x9.5 +31 19x9.5 +40 20x10 +35 |
| SL55 AMG | 2003-2008 | See factory sizes below |
| SL63 AMG | 2008-2012 | See factory sizes below |
| SL65 AMG | 2005-2011 | See factory sizes below |
Wheel sizes Mercedes-Benz fitted to the 2003-2012 Mercedes-Benz SL-Class from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x8.5 +35 |
| 18x8.5 +30 |
| 18x8.5 +35 |
| 18x8.5 +30 front / 18x9.5 +33 rear |
| 18x8.5 +35 front / 18x9.5 +40 rear |
| 18x9.5 +33 |
| 18x9.5 +40 |
| 19x8.5 +30 front / 19x9.5 +31 rear |
| 19x8.5 +35 front / 19x9.5 +40 rear |
| 19x9.5 +31 |
| 19x9.5 +40 |
| 20x10 +35 |
Widths and offsets with Verified Fitment on the 2003-2012 Mercedes-Benz SL-Class: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 17-19" | 8.5" | +13 to +40 | +3 to +45 |
| 17-19" | 9" | +19 to +34 | +9 to +51 |
| 17-19" | 9.5" | +26 to +28 | +16 to +45 |
| 17-19" | 10" | — | +22 to +39 |
| 17-19" | 10.5" | — | +29 to +33 |
Wider still: 17x11 front — / rear +14 to +32; 17x11.5 front — / rear +21 to +26; 18x11 front — / rear +14 to +32; 18x11.5 front — / rear +21 to +26; 19x11 front — / rear +14 to +32; 19x11.5 front — / rear +21 to +26 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18-19" | 8.5" | +13 to +40 | — |
| 18-19" | 9" | +19 to +34 | — |
| 18-19" | 9.5" | +26 to +28 | +16 to +43 |
| 18-19" | 10" | — | +22 to +39 |
| 18-19" | 10.5" | — | +29 to +33 |
Wider still: 18x11 front — / rear +14 to +32; 18x11.5 front — / rear +21 to +26; 19x11 front — / rear +14 to +32; 19x11.5 front — / rear +21 to +26 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18-20" | 8.5" | +13 to +40 | +3 to +40 |
| 18-20" | 9" | +19 to +34 | +9 to +46 |
| 18-20" | 9.5" | +26 to +28 | +16 to +45 |
| 18-20" | 10" | — | +22 to +39 |
| 18-20" | 10.5" | — | +29 to +33 |
Wider still: 18x11 front — / rear +14 to +32; 18x11.5 front — / rear +21 to +26; 19x11 front — / rear +14 to +32; 19x11.5 front — / rear +21 to +26; 20x11 front — / rear +14 to +32; 20x11.5 front — / rear +21 to +26 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2003-2012 Mercedes-Benz SL-Class. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.












Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)





Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)















Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)
The 2003-2012 Mercedes-Benz SL-Class (R230) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 17x8.5 +35; 18x8.5 +30; 18x8.5 +35; 18x8.5 +30 front / 18x9.5 +33 rear; 18x8.5 +35 front / 18x9.5 +40 rear; 18x9.5 +33; 18x9.5 +40; 19x8.5 +30 front / 19x9.5 +31 rear; 19x8.5 +35 front / 19x9.5 +40 rear; 19x9.5 +31; 19x9.5 +40; 20x10 +35.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 17" to 20" in diameter; see the size table for the offset range at each width.