Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz SL-Class built from 2022 to 2026 (AMG SL43, AMG SL55, AMG SL63, AMG SL63 S E Performance).
Every 2022-2026 Mercedes-Benz SL-Class uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz SL-Class (R232) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| AMG SL43 | 2024-2026 | See factory sizes below |
| AMG SL55 | 2022-2026 | 19x9.5 +50 front / 19x11 +60 rear 20x9.5 +53.5 front / 20x11 +63 rear 21x9.5 +56 front / 21x10 +67 rear 21x9.5 +56 front / 21x11 +67 rear |
| AMG SL63 | 2022-2026 | See factory sizes below |
| AMG SL63 S E Performance | 2025-2026 | See factory sizes below |
Wheel sizes Mercedes-Benz fitted to the 2022-2026 Mercedes-Benz SL-Class from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 19x9.5 +50 front / 19x11 +60 rear |
| 20x9.5 +53 front / 20x11 +63 rear |
| 21x9.5 +56 front / 21x10 +67 rear |
| 21x9.5 +56 front / 21x11 +67 rear |
Widths and offsets with Verified Fitment on the 2022-2026 Mercedes-Benz SL-Class: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 19-22" | 9.5" | +33 to +55 | — |
| 19-22" | 10" | +39 to +49 | — |
| 19-22" | 11" | — | +43 to +66 |
| 19-22" | 11.5" | — | +49 to +59 |
Wider still: 19x12.5 front — / rear +41 to +52; 20x12.5 front — / rear +41 to +52; 21x12.5 front — / rear +41 to +52; 22x12.5 front — / rear +41 to +52 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2022-2026 Mercedes-Benz SL-Class. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)




The 2022-2026 Mercedes-Benz SL-Class (R232) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 19x9.5 +50 front / 19x11 +60 rear; 20x9.5 +53 front / 20x11 +63 rear; 21x9.5 +56 front / 21x10 +67 rear; 21x9.5 +56 front / 21x11 +67 rear.
Bolt-on sizes run from 19" to 22" in diameter; see the size table for the offset range at each width.