Toyota 4Runner (N120/N130) 1990-1995 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Toyota 4Runner built from 1990 to 1995.

Fitment specs

Bolt pattern6X139.7
Center bore106.1 mm
Lug threadM12x1.5
Model years1990-1995
GenerationN120/N130

Every 1990-1995 Toyota 4Runner uses a 6X139.7 bolt pattern with a 106.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 106.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Toyota 4Runner (N120/N130) and the model years each was sold. All of them share the 6X139.7 bolt pattern.

SubmodelYearsFactory wheel sizes
SR51990-199515x6 +0

Factory wheel sizes

Wheel sizes Toyota fitted to the 1990-1995 Toyota 4Runner from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
15x6 +0
15x7 +8
16x8.5 +0
15x6 +38

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1990-1995 Toyota 4Runner: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
15-17"6"-17 to +10
15-17"6.5"-11 to +16
15-17"7"-4 to +23

Wider still: 15x7.5 -19 to +30; 15x8 -12 to +24; 16x7.5 -19 to +30; 16x8 -12 to +24; 17x7.5 -19 to +30; 17x8 -12 to +24 fit with modifications (torsion-bar crank or 2-3 in. lift, trim front bumper / fender lip at full lock, trim or remove mud flaps).

FAQ

What is the bolt pattern of the 1990-1995 Toyota 4Runner?

The 1990-1995 Toyota 4Runner (N120/N130) uses a 6X139.7 bolt pattern and a 106.1 mm center bore.

What size wheels came on the 1990-1995 Toyota 4Runner from the factory?

Factory sizes: 15x6 +0; 15x7 +8; 16x8.5 +0; 15x6 +38.

What lug thread size does the 1990-1995 Toyota 4Runner use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 1990-1995 Toyota 4Runner without modifications?

Bolt-on sizes run from 15" to 17" in diameter; see the size table for the offset range at each width.