Toyota 4Runner (N500) 2025-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Toyota 4Runner built from 2025 to 2026 (SR5, TRD Sport, TRD Off-Road, Limited, Platinum, TRD Pro, Trailhunter).

Fitment specs

Bolt pattern6X139.7
Center bore95.1 mm
Lug threadM14x1.5
Model years2025-2026
GenerationN500

Every 2025-2026 Toyota 4Runner uses a 6X139.7 bolt pattern with a 95.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 95.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Toyota 4Runner (N500) and the model years each was sold. All of them share the 6X139.7 bolt pattern.

SubmodelYearsFactory wheel sizes
SR52025-202617x7 +50
TRD Sport2025-202620x8 +45
TRD Off-Road2025-202618x7.5 +55
Limited2025-202620x8 +45
Platinum2025-202620x8 +45
TRD Pro2025-202618x7.5 +55
Trailhunter2025-202618x7.5 +55

Factory wheel sizes

Wheel sizes Toyota fitted to the 2025-2026 Toyota 4Runner from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
17x7 +50
18x7.5 +55
20x8 +45

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2025-2026 Toyota 4Runner: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

SR5

DiameterWidthOffset range
17-22"7"+31 to +60
17-22"7.5"+38 to +60
17-22"8"+44 to +54

Wider still: 17x9 +36 to +47; 18x9 +36 to +47; 19x9 +36 to +47; 20x9 +36 to +47; 21x9 +36 to +47; 22x9 +36 to +47 fit with modifications (trim front bumper cover / fender liner at full lock, roll rear fender lips, hub-centric rings for aftermarket wheels).

TRD Sport, Limited, Platinum

DiameterWidthOffset range
20-22"8"+44 to +54

Wider still: 20x9 +36 to +47; 21x9 +36 to +47; 22x9 +36 to +47 fit with modifications (trim front bumper cover / fender liner at full lock, roll rear fender lips, hub-centric rings for aftermarket wheels).

TRD Off-Road, TRD Pro, Trailhunter

DiameterWidthOffset range
18-22"7.5"+38 to +60
18-22"8"+44 to +54

Wider still: 18x9 +36 to +47; 19x9 +36 to +47; 20x9 +36 to +47; 21x9 +36 to +47; 22x9 +36 to +47 fit with modifications (trim front bumper cover / fender liner at full lock, roll rear fender lips, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 2025-2026 Toyota 4Runner?

The 2025-2026 Toyota 4Runner (N500) uses a 6X139.7 bolt pattern and a 95.1 mm center bore.

What size wheels came on the 2025-2026 Toyota 4Runner from the factory?

Factory sizes: 17x7 +50; 18x7.5 +55; 20x8 +45.

What lug thread size does the 2025-2026 Toyota 4Runner use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2025-2026 Toyota 4Runner without modifications?

Bolt-on sizes run from 17" to 22" in diameter; see the size table for the offset range at each width.