Toyota 4Runner (N210) 2003-2009 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Toyota 4Runner built from 2003 to 2009 (SR5, Sport Edition, Limited, Trail).

Fitment specs

Bolt pattern6X139.7
Center bore106.1 mm
Lug threadM12x1.5
Model years2003-2009
GenerationN210

Every 2003-2009 Toyota 4Runner uses a 6X139.7 bolt pattern with a 106.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 106.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Toyota 4Runner (N210) and the model years each was sold. All of them share the 6X139.7 bolt pattern.

SubmodelYears
SR52003-2009
Sport Edition2003-2009
Limited2003-2009
Trail2008-2009

Factory wheel sizes

Wheel sizes Toyota fitted to the 2003-2009 Toyota 4Runner from the factory. Offsets are ET in millimeters.

Factory size
16x7 +30
17x7.5 +30
18x7.5 +25

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2003-2009 Toyota 4Runner: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
16-20"7"+13 to +36
16-20"7.5"+19 to +29

Wider still: 16x8.5 +11 to +22; 17x8.5 +11 to +22; 18x8.5 +11 to +22; 19x8.5 +11 to +22; 20x8.5 +11 to +22 fit with modifications (trim front bumper cover / fender liner at full lock, roll rear fender lips, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 2003-2009 Toyota 4Runner?

The 2003-2009 Toyota 4Runner (N210) uses a 6X139.7 bolt pattern and a 106.1 mm center bore.

What size wheels came on the 2003-2009 Toyota 4Runner from the factory?

Factory sizes: 16x7 +30; 17x7.5 +30; 18x7.5 +25.

What lug thread size does the 2003-2009 Toyota 4Runner use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2003-2009 Toyota 4Runner without modifications?

Bolt-on sizes run from 16" to 20" in diameter; see the size table for the offset range at each width.