Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Toyota 4Runner built from 2010 to 2024 (SR5, SR5 Premium, TRD Sport, Trail, Trail Premium, TRD Off-Road, TRD Off-Road Premium, Limited, TRD Pro).
Every 2010-2024 Toyota 4Runner uses a 6X139.7 bolt pattern with a 106.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 106.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Toyota 4Runner (N280) and the model years each was sold. All of them share the 6X139.7 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| SR5 | 2010-2024 | 17x7 +15 17x7 +4 17x7.5 +15 |
| SR5 Premium | 2014-2024 | 17x7 +15 17x7 +4 17x7.5 +15 |
| TRD Sport | 2022-2024 | 20x7 +15 |
| Trail | 2010-2019 | 17x7 +15 17x7 +4 17x7.5 +15 |
| Trail Premium | 2014-2019 | See factory sizes below |
| TRD Off-Road | 2020-2024 | 17x7 +15 17x7 +4 17x7.5 +15 |
| TRD Off-Road Premium | 2020-2024 | 17x7 +15 17x7 +4 17x7.5 +15 |
| Limited | 2010-2024 | 20x7 +15 |
| TRD Pro | 2015-2024 | 17x7 +15 17x7 +4 17x7.5 +15 |
Wheel sizes Toyota fitted to the 2010-2024 Toyota 4Runner from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7 +4 |
| 17x7 +15 |
| 17x7.5 +15 |
| 20x7 +15 |
Widths and offsets with Verified Fitment on the 2010-2024 Toyota 4Runner: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 17-21" | 7" | -9 to +25 |
| 17-21" | 7.5" | -2 to +20 |
| 17-21" | 8" | +4 to +14 |
Wider still: 17x9 -4 to +7; 18x9 -4 to +7; 19x9 -4 to +7; 20x9 -4 to +7; 21x9 -4 to +7 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
| Diameter | Width | Offset range |
|---|---|---|
| 20-21" | 7" | -9 to +25 |
| 20-21" | 7.5" | -2 to +20 |
| 20-21" | 8" | +4 to +14 |
Wider still: 20x9 -4 to +7; 21x9 -4 to +7 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
The 2010-2024 Toyota 4Runner (N280) uses a 6X139.7 bolt pattern and a 106.1 mm center bore.
Factory sizes: 17x7 +4; 17x7 +15; 17x7.5 +15; 20x7 +15.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 17" to 21" in diameter; see the size table for the offset range at each width.