Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the BMW 5 Series built from 1996 to 1996.
Every 1996 BMW 5 Series uses a 5X120 bolt pattern with a 74.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 74.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
Wheel sizes BMW fitted to the 1996 BMW 5 Series from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 15x7 +20 |
| 16x7 +20 |
| 17x8 +20 |
| 18x8 +20 front / 18x9.5 +22 rear |
Widths and offsets with Verified Fitment on the 1996 BMW 5 Series: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 15-18" | 7" | +3 to +26 |
| 15-18" | 7.5" | +9 to +19 |
Wider still: 15x8.5 +1 to +12; 16x8.5 +1 to +12; 17x8.5 +1 to +12; 18x8.5 +1 to +12 fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).
The 1996 BMW 5 Series (E34) uses a 5X120 bolt pattern and a 74.1 mm center bore.
Factory sizes: 15x7 +20; 16x7 +20; 17x8 +20; 18x8 +20 front / 18x9.5 +22 rear.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 15" to 18" in diameter; see the size table for the offset range at each width.