Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the BMW 5 Series built from 2004 to 2010 (525i, 525xi, 528i, 528xi, 528i xDrive, 530i, 530xi, 535i, 535xi, 535i xDrive, 545i, 550i, M5).
Every 2004-2010 BMW 5 Series uses a 5X120 bolt pattern with a 72.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 72.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the BMW 5 Series (E60/E61) and the model years each was sold. All of them share the 5X120 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| 525i | 2004-2007 | 16x7 +20 17x7.5 +20 17x8 +20 |
| 525xi | 2006-2007 | 17x7.5 +43 17x8 +43 |
| 528i | 2008-2010 | 17x7.5 +20 18x8 +20 |
| 528xi | 2008 | 17x7.5 +43 18x8 +43 |
| 528i xDrive | 2009-2010 | 17x7.5 +43 18x8 +43 |
| 530i | 2004-2007 | 17x7.5 +20 18x8 +20 |
| 530xi | 2006-2007 | 17x7.5 +43 18x8 +43 |
| 535i | 2008-2010 | 18x8 +30 19x8 +25 19x8.5 +25 front / 19x9.5 +39 rear 20x8.5 +25 front / 20x10 +41 rear 21x8.5 +25 front / 21x10 +41 rear |
| 535xi | 2008 | 17x7.5 +43 18x9 +55 |
| 535i xDrive | 2009-2010 | 17x7.5 +43 18x8 +43 18x9 +55 |
| 545i | 2004-2005 | 17x7.5 +20 18x9 +32 |
| 550i | 2006-2010 | 18x8 +30 19x8.5 +25 19x8.5 +25 front / 19x9.5 +39 rear 20x8.5 +25 front / 20x10 +41 rear 21x8.5 +25 front / 21x10 +41 rear |
| M5 | 2006-2010 | 19x9.5 +32 |
Wheel sizes BMW fitted to the 2004-2010 BMW 5 Series from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 16x7 +20 |
| 17x7.5 +20 |
| 17x7.5 +43 |
| 17x8 +20 |
| 17x8 +43 |
| 18x8 +20 |
| 18x8 +43 |
| 18x9 +32 |
| 18x9 +55 |
| 19x9.5 +32 |
Widths and offsets with Verified Fitment on the 2004-2010 BMW 5 Series: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 16-19" | 7" | -10 to +30 | -10 to +30 |
| 16-19" | 7.5" | -3 to +36 | -3 to +36 |
| 16-19" | 8" | +3 to +42 | +3 to +42 |
| 16-19" | 8.5" | +9 to +36 | +9 to +36 |
| 16-19" | 9" | +16 to +29 | +16 to +29 |
| 16-19" | 9.5" | — | +22 to +23 |
Wider still: 16x10 front +8 to +23 / rear +8 to +23; 17x10 front +8 to +23 / rear +8 to +23; 18x10 front +8 to +23 / rear +8 to +23; 19x10 front +8 to +23 / rear +8 to +23 fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 17-19" | 7.5" | -3 to +48 | -3 to +48 |
| 17-19" | 8" | +3 to +42 | +3 to +42 |
| 17-19" | 8.5" | +9 to +36 | +9 to +36 |
| 17-19" | 9" | +16 to +29 | +16 to +29 |
| 17-19" | 9.5" | — | +22 to +23 |
Wider still: 17x10 front +8 to +23 / rear +8 to +23; 18x10 front +8 to +23 / rear +8 to +23; 19x10 front +8 to +23 / rear +8 to +23 fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 17-19" | 7.5" | -3 to +30 | -3 to +30 |
| 17-19" | 8" | +3 to +36 | +3 to +36 |
| 17-19" | 8.5" | +9 to +36 | +9 to +36 |
| 17-19" | 9" | +16 to +29 | +16 to +29 |
| 17-19" | 9.5" | — | +22 to +23 |
Wider still: 17x10 front +8 to +23 / rear +8 to +23; 18x10 front +8 to +23 / rear +8 to +23; 19x10 front +8 to +23 / rear +8 to +23 fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18-21" | 8" | +3 to +40 | +3 to +40 |
| 18-21" | 8.5" | +9 to +36 | +9 to +36 |
| 18-21" | 9" | +16 to +29 | +16 to +29 |
| 18-21" | 9.5" | — | +22 to +23 |
Wider still: 18x10 front +8 to +23 / rear +8 to +23; 19x10 front +8 to +23 / rear +8 to +23; 20x10 front +8 to +23 / rear +8 to +23; 21x10 front +8 to +23 / rear +8 to +23 fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).
| Diameter | Width | Offset range |
|---|---|---|
| 19" | 9.5" | +22 to +31 |
Wider still: 19x10 +8 to +25 fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2004-2010 BMW 5 Series. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.












Modifications Required (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub)















Modifications Required (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub)














Modifications Required (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub)














Modifications Required (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub)



Modifications Required (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub)
The 2004-2010 BMW 5 Series (E60/E61) uses a 5X120 bolt pattern and a 72.6 mm center bore.
Factory sizes: 16x7 +20; 17x7.5 +20; 17x7.5 +43; 17x8 +20; 17x8 +43; 18x8 +20; 18x8 +43; 18x9 +32; 18x9 +55; 19x9.5 +32.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 16" to 21" in diameter; see the size table for the offset range at each width.