Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the BMW 5 Series built from 1997 to 2003 (525i, 528i, 530i, 540i, M5).
Every 1997-2003 BMW 5 Series uses a 5X120 bolt pattern with a 74.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 74.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the BMW 5 Series (E39) and the model years each was sold. All of them share the 5X120 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| 525i | 2001-2003 | 15x6.5 +18 15x7 +20 16x7 +20 17x8 +20 17x8 +20 front / 17x9 +26 rear 18x8 +20 front / 18x9 +24 rear |
| 528i | 1997-2000 | 15x6.5 +18 15x7 +20 16x7 +20 17x8 +20 17x8 +20 front / 17x9 +26 rear 18x8 +20 front / 18x9 +24 rear |
| 530i | 2001-2003 | 15x7 +20 17x8 +20 17x9 +26 18x9 +24 |
| 540i | 1997-2003 | 15x7 +20 16x7 +20 17x8 +20 17x8 +20 front / 17x9 +26 rear 17x9 +26 18x8 +20 front / 18x9 +24 rear 18x9 +24 |
| M5 | 2000-2003 | 18x8 +20 front / 18x9 +24 rear 18x9 +24 |
Wheel sizes BMW fitted to the 1997-2003 BMW 5 Series from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 15x6.5 +18 |
| 15x7 +20 |
| 16x7 +20 |
| 17x8 +20 |
| 17x8 +20 front / 17x9 +26 rear |
| 17x9 +26 |
| 18x8 +20 front / 18x9 +24 rear |
| 18x9 +24 |
Widths and offsets with Verified Fitment on the 1997-2003 BMW 5 Series: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 17-18" | 7" | -10 to +34 | — |
| 17-18" | 7.5" | -3 to +32 | — |
| 17-18" | 8" | +3 to +25 | -4 to +44 |
| 17-18" | 8.5" | +9 to +19 | +3 to +38 |
| 17-18" | 9" | — | +9 to +31 |
| 17-18" | 9.5" | — | +15 to +25 |
Wider still: 17x10.5 front — / rear +7 to +18; 18x10.5 front — / rear +7 to +18 fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 17-18" | 7" | -10 to +30 | — |
| 17-18" | 7.5" | -3 to +32 | — |
| 17-18" | 8" | +3 to +25 | -4 to +43 |
| 17-18" | 8.5" | +9 to +19 | +3 to +38 |
| 17-18" | 9" | — | +9 to +31 |
| 17-18" | 9.5" | — | +15 to +25 |
Wider still: 17x10.5 front — / rear +7 to +18; 18x10.5 front — / rear +7 to +18 fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18" | 8" | +3 to +25 | — |
| 18" | 8.5" | +9 to +19 | — |
| 18" | 9" | — | +9 to +31 |
| 18" | 9.5" | — | +15 to +25 |
Wider still: 18x10.5 front — / rear +7 to +18 fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 1997-2003 BMW 5 Series. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
The 1997-2003 BMW 5 Series (E39) uses a 5X120 bolt pattern and a 74.1 mm center bore.
Factory sizes: 15x6.5 +18; 15x7 +20; 16x7 +20; 17x8 +20; 17x8 +20 front / 17x9 +26 rear; 17x9 +26; 18x8 +20 front / 18x9 +24 rear; 18x9 +24.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 17" to 18" in diameter; see the size table for the offset range at each width.