Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the BMW 5 Series built from 2024 to 2026 (530i, 530i xDrive, 540i xDrive, 550e xDrive, i5 eDrive40, i5 xDrive40, i5 M60 xDrive).
Every 2024-2026 BMW 5 Series uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the BMW 5 Series (G60) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| 530i | 2024-2026 | 19x8.5 +29 19x8.5 +29 front / 19x10 +46 rear 20x8.5 +28 front / 20x10 +46 rear 21x8.5 +32 front / 21x10 +46 rear |
| 530i xDrive | 2024-2026 | 19x8.5 +29 19x8.5 +29 front / 19x10 +46 rear 20x8.5 +28 front / 20x10 +46 rear 21x8.5 +32 front / 21x10 +46 rear |
| 540i xDrive | 2024-2026 | 19x8.5 +29 19x8.5 +29 front / 19x10 +46 rear 20x8.5 +28 front / 20x10 +46 rear 21x8.5 +32 front / 21x10 +46 rear |
| 550e xDrive | 2025-2026 | 19x8.5 +29 19x8.5 +29 front / 19x10 +46 rear 20x8.5 +28 front / 20x10 +46 rear 21x8.5 +32 front / 21x10 +46 rear |
| i5 eDrive40 | 2024-2026 | See factory sizes below |
| i5 xDrive40 | 2024-2026 | See factory sizes below |
| i5 M60 xDrive | 2024-2026 | See factory sizes below |
Wheel sizes BMW fitted to the 2024-2026 BMW 5 Series from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 19x8.5 +29 |
| 19x8.5 +29 front / 19x10 +46 rear |
| 20x8.5 +28 front / 20x10 +46 rear |
| 21x8.5 +32 front / 21x9.5 +47 rear |
| 21x8.5 +32 front / 21x10 +46 rear |
Widths and offsets with Verified Fitment on the 2024-2026 BMW 5 Series: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 19-21" | 8.5" | +12 to +34 |
| 19-21" | 9" | +18 to +28 |
Wider still: 19x10 +10 to +21; 20x10 +10 to +21; 21x10 +10 to +21 fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).
| Diameter | Width | Offset range |
|---|---|---|
| 18-21" | 8.5" | +12 to +34 |
| 18-21" | 9" | +18 to +28 |
Wider still: 18x10 +10 to +21; 19x10 +10 to +21; 20x10 +10 to +21; 21x10 +10 to +21 fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2024-2026 BMW 5 Series. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.



Modifications Required (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub)









Modifications Required (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub)












The 2024-2026 BMW 5 Series (G60) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 19x8.5 +29; 19x8.5 +29 front / 19x10 +46 rear; 20x8.5 +28 front / 20x10 +46 rear; 21x8.5 +32 front / 21x9.5 +47 rear; 21x8.5 +32 front / 21x10 +46 rear.
Its wheel fasteners use a M14x1.25 thread.
Bolt-on sizes run from 18" to 21" in diameter; see the size table for the offset range at each width.